backinbrat

some consistant good feedback on Ramenignes then, thats where im wanting to get the performance parts, and ive been thinking, well yeah, tis expensive, BUT it'll last, as it has to! lol, i can always put it in my other truck anyways, the main point of this build, is not just to bring the old thing back to life, but to get the experience of building a 'high performance' engine, lol and not just go and cheat, and spend money on a standard engine, and not modify it, compared to an engine that i already have, which i know i can work with, and mod, cause theres none of that bloody ecu gear flying aroound everywhere, im no mechanic yet, just i know me engines. cheers for the feedback everyone. oh, and yes, everything in england it a bit toy town compared to america, ive been to the states, and, well it dwafs here, that why whenever me and my mate see anything big, its not just big, its industrial sized, heavy duty, and most importantly AMERICAN SIZED, LMAO!

alright there everyone, ive got the engine out of my suby, tis an EA81, 1988 UK model, im assumeing its exactly the same as everyone elses! lol right, so im looking at doing some performance work on it, the main reason was to basically refresh it, as after 19 years of use, its pretty carboned, crapped and just generally used, lol, it has been maintained, i can tell, theres always been plenty of oil in it, theres always been antifreeze in it, no cracks, no nasty noises, so i think its a good block to be working on, i just want to upgrade it a bit. i was looking at these mods for it -balanced bottom end -shave the heads (anyone know whats the best for rally application compression wise and stuff, i can get 98 octane at the pumps if that helps) -do a good bit of porting and polishing -possibly performance camshafts, valve springs, and lifters obviously all new rings and shells and some low friction assembly lube -are stainless valves worth it? or is it just as good to clean up the valves and make them oober smooth? theres also all the other bits and bobs -dual carbs, maybe -advancing the timing, i heard something around the 12 degree mark is good, am i right in saying that? correct me on any of this if im wrong! -silicone HT leads, some new NGK's, and ive got a new performance coil -ive also heard of lightend flywheels, and they can be done whilst having the bottom end balanced, so ive heard, also on a thread about these ive heard that they will -NOT reduce torque -NOT change the torque curve for the worse (WILL look better) -make it easier to stall -make your clutch easier to overheat (You are lightening your heat sink) -NOT change your gearing -NOT make it harder to accelerate up hill all that true? lol remind me if ive left something obvious out which is a performance tweak/mod all this is probably edging towards £700, thats probs about $1400 US, and to be honest, here in england, it aint to bader price, things are f**ing expensive over here, or they end up being so when shipped, lol my eventual aim for at least one of my trucks is sort of a rally spec machine, and to just plop a EA82 in (which are quite hard to find here) and i dont want the hastle of bloody ECU's and such, i just dont want the hassle, the same with EJ's but with these its the price! woo! maybe when im older and have the money though! give us your thoughts and opinions, please, no argueing! ive seen it happan enough times on other threads! ideally i wouldnt mind some useful info out of this anyone also know what sort of power i might be putting out at the end of it all? im sorta guessin the 110-120 mark, and hopefully more torque, im not worried bout any of this 'seems like lost torque crap' ill just buy a performance clutch, lol once again, things that are to put into consideration -98 octane pump fuel is no problem to get hold of, can get higher -this is more focused towards rally application, im getting the tyres and wheels, and having a stripped out race interior, bucket seats, 4 point race harness etc -everyday 'driveabilty' is not really much of a bother (how smooth it runs blah blah) basically i want it noisey, fast (for what it is) unforgiving and harsh oh, and whilst were at is, dose anyone know why rally cars pop and bang when changing gears and stuff, as far as i no tis the turbo, but, i have heard mk1 escorts and such doing the same, well thats what i would like mine to do LMAO! hope you all had a good christmas and have a fun filled 2007! soz for the long post, keeps ya entertained though! thanks for bothing to read to!

alright there everyone, ive got the engine out of my suby, tis an EA81, 1988 UK model, im assumeing its exactly the same as everyone elses! lol right, so im looking at doing some performance work on it, the main reason was to basically refresh it, as after 19 years of use, its pretty carboned, crapped and just generally used, lol, it has been maintained, i can tell, theres always been plenty of oil in it, theres always been antifreeze in it, no cracks, no nasty noises, so i think its a good block to be working on, i just want to upgrade it a bit. i was looking at these mods for it -balanced bottom end -shave the heads (anyone know whats the best for rally application compression wise and stuff, i can get 98 octane at the pumps if that helps) -do a good bit of porting and polishing -possibly performance camshafts, valve springs, and lifters obviously all new rings and shells and some low friction assembly lube -are stainless valves worth it? or is it just as good to clean up the valves and make them oober smooth? theres also all the other bits and bobs -dual carbs, maybe -advancing the timing, i heard something around the 12 degree mark is good, am i right in saying that? correct me on any of this if im wrong! -silicone HT leads, some new NGK's, and ive got a new performance coil -ive also heard of lightend flywheels, and they can be done whilst having the bottom end balanced, so ive heard, also on a thread about these ive heard that they will -NOT reduce torque -NOT change the torque curve for the worse (WILL look better) -make it easier to stall -make your clutch easier to overheat (You are lightening your heat sink) -NOT change your gearing -NOT make it harder to accelerate up hill all that true? lol remind me if ive left something obvious out which is a performance tweak/mod all this is probably edging towards £700, thats probs about $1400 US, and to be honest, here in england, it aint to bader price, things are f**ing expensive over here, or they end up being so when shipped, lol my eventual aim for at least one of my trucks is sort of a rally spec machine, and to just plop a EA82 in (which are quite hard to find here) and i dont want the hastle of bloody ECU's and such, i just dont want the hassle, the same with EJ's but with these its the price! woo! maybe when im older and have the money though! give us your thoughts and opinions, please, no argueing! ive seen it happan enough times on other threads! ideally i wouldnt mind some useful info out of this anyone also know what sort of power i might be putting out at the end of it all? im sorta guessin the 110-120 mark, and hopefully more torque, im not worried bout any of this 'seems like lost torque crap' ill just buy a performance clutch, lol once again, things that are to put into consideration -98 octane pump fuel is no problem to get hold of, can get higher -this is more focused towards rally application, im getting the tyres and wheels, and having a stripped out race interior, bucket seats, 4 point race harness etc -everyday 'driveabilty' is not really much of a bother (how smooth it runs blah blah) basically i want it noisey, fast (for what it is) unforgiving and harsh oh, and whilst were at is, dose anyone know why rally cars pop and bang when changing gears and stuff, as far as i no tis the turbo, but, i have heard km1 escorts and such doing the same, well thats what i would like mine to do LMAO! hope you all had a good christmas and have a fun filled 2007! soz for the long post, keeps ya entertained though! thanks for bothing to read to!

LMAO! no, not many of them! though some of them are nice, like the old corvettes and cameros, and one of my favourite the el camino (obviously after subarus) I did know a guy with a corvette stingray but things like that they guzzle too much gas really, with 95 oct unleaded floating around 95p-£1 a litre, which in nearly $2 (U.S) you can see why we dont have too many V8 machines over here, although my step dad does have a grand cherokee! (yes a striaght 6, i know!) things over here mostly with V8's are range rovers, you do get the occasional proper V8 machines, and sometimes a hotrod, and im talkin USA hotrods here, model T's with funking great lumps in them! but my dad does have a ford anglia with a V6 in it, white with blue flames. anyways im drifting off the subject here, looks like im gonna have too make up some custom braketrey, but i do have a friend who might have an SVX alternator or something beefery than standard, but at least i know what im aiming for, cheers everyone Tom

Ah, you see i might have a problem, do you class a GM alternator as something american, like a chevy one or somin or do you class that as everything, as vauxhall is part of GM, because getting hold of the US stuff over here aint easy and its expensive, but thank you for the info and advise, i shall search for something that could fit, and something with that power output, and i can always make up some braketery to attach it, cheers! Tom Sussex, UK

hi there everybody, im fairly new to this fourm and this is my first post/thread whatever its called! I was wondering if anyone could tell me the original output of an EA81 alternator as im draining my battery (which is only a year 1/2 old and seemed to work fine before...) I have all the usual bits working (lights, engine elctronics etc) but now i have a CB radio and a 25watt pioner tape player (which is actually quite good! to my suprise) and i have 2 55watt hella 550 compacts, and with these my juice rate is not keeping up, and im wanting to put 3 more lights on it, big ones, is this just because im not createing enough power or is it because its dischargeing slightly? if i hold it at about 4000rpm (its a guess, the UK specs dont have a rev counter) then it will just keep up. whats my problem? thanks all! Tom Sussex, UK