oldschool

Hi , I'm looking for a complete set of rear disc brakes ( complete ) hubs , e- brake cable for my 98 Forester . Any one got a set for sale ? I'm in Beverton. Thanks

I had a 87 gl turbo wagon, that i was going to put a WRX in it. I already put the wrx trans in and the wrx rear end in. I had a complete 5 lug swap in it also. The peddle assembly was a little difficult also, there is alot of fab work to do, be ready for that. I started to call the car My money pit project.The motor will fit just barely betrweeen the frame rails, but it will fit , also you need the cross member from the xt6 if I remember right. In the long run I took all of my parts back off and got rid or the car. It was costing way to much money .It was fun but the ej 22 is alot easier and alot of fun to do and it does not take but a week end to do it. Also not bad on the pocket.

I put a ej AWD trans in my 87 gl and it was easy, also I'm putting a 86 gl together. It consists of all wrx tranny and rear diff, 5 lug conversionand yes a wrx motor will fit between the frame rails.If you can dream it, it can be built.

I just got a 85 sedan a couple of months ago. It started out as a auto and now is a 5speed d/r, disk brakes all the way around and a 2.2 motor in it. I'm loveing it.

Hey nice job! What power sreering lines did you use ? Thanks

Very nice,glad to see it's sounds great!

I put a impreza AWD trans in a 87 gl wagon. For front axles, I hink I found a shop in Tigard that can make them. I'm in the process of putting the 2.2 in now. and thanks to Pooparu, I put a LSD 4:11 rear end in it. Will get back with results on axles

If you do a complete dash swap to a 87 , you will get rid of that problem. To the the dash swap it only takes a couple of hours to do. It is easy to do. Go to U-pull it and get a 87 dash and wiring harness and it is a plug and play.

Only oem oil filters

I forgot, what is the name of the on line subaru Oem parts? Thanks

Try MysteriousXTC I bought two

Well so far the swap is going easy. I got the middle section of a ej trans x-member and drilled out my stock ea, x-member and it fits perfect. Now for the fear section may be more difficult. The car has a SJR 4 inch lift on it already

You are my HERO

I'm doing a impreza AWD trans in mine, it also has a 2.2 in it , all disk brakes and getting a LSD rear diff. 15 in rims with 27's. I think it will handle great

Hey Im doing one now. I have a 87gl wagon hi/lo 5 speed and changing it over to a AWD 5 speed with 4:11 finals. With the set up it has right now, it has to much wheel pull. It does not handle well. This for my boy,he just started driving. So far so good.