texasjack

Wires going to the right hole and will check the line today, Thank you Texasjack

Gas shoots up from the carb,

Thank Y'all for the help. It does idle rough, the distributor is rebuilt, I will disconnect the line to the distributor and check that. Texasjack

I have an 83 GL sedan with a 1.8 pushrod engine that will start but dies when I attempt to accelerate above an idle. It spits back through the carb and dies. The previous owner installed new guts in the distributor. I checked the plug wires and they are correct and checked the timing, it is good. Any ideas would be appreciated. Thank you Texasjack

I recently traded for an 83 with a pushrod 1.8 engine. It will idle but when you attempt to give it gas it will spit through the carb and die. THe previous owner install new guts in the distributor. I reset the timing. checked the plug wire locations. It has 4 PSI fuel pressure. Any ideas will be appreciated. Thank you Texasjack

I know how to do the work but myOLD back will not permit that, TEXASjack

Sounds like fun. I need to get the timing belts changed on my 86 Brat. After 3 back surgeries, I will have to get someone to do it for me. TEXASjack

I live west of Ft. Worth off I-30W, 3 miles west of Loop 820. Have a 79 Brat and a n 86 Brat. The 79 is available for immediate adoption. TEXASjack

I have a 79 Brat for sale. TEXASjack

EJ 25s are Subie's Vega. Yhey must have been when GM had their finger in Subaru. Typical GM quality aka The American Yugo. TEXASjack

I once had an old Subie and when I was selling it folks would call me and ask what is a Subaru. Luckly we are not bothered with "white misery" and rust here. I have a 79 Brat for sale and an 86 Brat coming from Conroe on Tuesday. I also have a truckload of Gen 1 parts. I reside just 3 miles west of Loop 820 off I-30 West. TEXASjack

I have some door latches and heater A/C complete under dash units. TEXASjack I do not come this way every day so please email me. Pajack1939@sbcglobal.net

If you have not found one I have one for $10 plus actual shipping. Email me @ pajack1939@sbcglobal.net TEXASjack

I have some Gen 1 parts including a 1.6 engine that turns over. NO BODY PARTS Email me if interested. Pajack1939@sbcglobal.net

What year did the Brat come with the 1.8 engine? Thank you Jack

I am looking for a Brat, would prefer later model. I am a Texan so I do not want a rust bucket. Thank you Jack