stinkydogfilms

It is an 86. It does have a 5 speed put in it by the previous owner though. I bought it off of Ebay in January. I will take a look tomorrow when I go to work. Godzilla does not know I bought it:( so I have been storing it at my job.

I am new to subies. The distributor on my motor is in the front close to the radiator. Is this an EA 81 or EA 82? Thank you, Mike

The shifter does not want to slide thru the gears with the engine off or on. reverse did grind with the motor running so I know the clutch needs adjustment. Any tips on adjusting the clutch? How about adjusting the shift linkage. Any tips there? It is a 5 speed in the 86 Brat. My thanks to the forum. Mike

more pics 3

more pics 2

more pics of the roll bar

I will do more pics tonight. I see the paperclip now. Just so you know the square floor tiles are 6 inch by 6 inch.

I 'm sorry, I do not see the paperclip. All of the smiley icons are there in the box and above the smiley box are spellcheck, increase size and switch editor mode. If someone will email me, I have 4 pics in an email draft ready to go and maybe they can post the pics for all. I have another 2 dozen pics to send. stinkydogfilms@sbcglobal.net Thank you, Mike

bump... Where do I click to upload the pics?

took the pics with a tape measure in each shot. I will try to upload. Am now uploading into my computer. Mike

AWESOME! great help here at this group. I will upload the pic of the weird switch tomorrow. MANY THANKS

Hi, Anyone have any ideas on having round tube bumpers made to put on the front and back of my 86 Brat? What size and what gauge to use? Can I buy anything at the Home improvement stores and use my MIG welder to fabricate. Same questions for fabricating a grill guard for use with a winch? thank you, Mike

Hi J, I have one on my back porch that came unmounted when I bought my first Brat earlier this year. It is the low profile one. I will get the measurements and try to take pics and post sometime tomorrow. (SATURDAY) I would like the someone to do the same for the front pushbar I want to have fabricated. Mike

Hi, I do not have my repair manuals with me. 1.) Can someone tell me where the fuel pump, fuel filters (2) fuel relay switch are located? Is anything inside the gas tank? I just bought a new tank and have yet to install it. I want to put in new components. Any tips or suggestions are ALWAYS more than welcomed. 2.)My fuel gauge does not work. Where do I start on troubleshooting it? 3.) There is a push in toogle switch that has a light on the pointed tip. It lights up when you push it in with the headlights on. Could this be for the aftermarket (?) fog lights mounted below the bumper? They may have burned out bulbs since they do not work. The switch is located in the bottom left of the dash panel under the fuel gauge to the left of the steering coloum. 4.) Also the headlights do not come on unless the key is in the ignition and turned to the on position. Is this normal? I thank you, Mike

Second that on the 86 BRAT

I have 14 inch pugs. What is the tallest tire I can go with 14 inch with no lift? How about the same size with the simple 2 inch lift?Tell me please how to do the 2 inch simple lift? Thank you, Mike