MtnBikerChk Posted December 18, 2009 Share Posted December 18, 2009 Ok some of you asked for pics - I promise they are coming but I haven't been home in the daylight - so watch for tomorrow..... Anyway I need to put a 2" hitch on so I can cart around my bicycles with my Thule T2 Are the DIYers safe? Curt, Hidden Hitch or Draw Tite? http://www.etrailer.com/hitch-2010_Subaru_Outback+Wagon.htm?style=0&t1=&so=dr!ps!to!ma!aw!tp!c1!c2!c3!c4!c5!c6!c72!c8!c9&h= Here's a teaser pic: on the left is my husband's '04 next to my '10 Quote Link to comment Share on other sites More sharing options...
johnceggleston Posted December 18, 2009 Share Posted December 18, 2009 i don't know for sure, but i doubt that they make a 2" hitch for a subaru. they might, but i can't imagine .... but you can get a standard 1 & 1/4 inch and then add a 2" adapter. Quote Link to comment Share on other sites More sharing options...
nipper Posted December 18, 2009 Share Posted December 18, 2009 I love hidden hitch. Are you talking about a 2" ball? Quote Link to comment Share on other sites More sharing options...
MtnBikerChk Posted December 19, 2009 Author Share Posted December 19, 2009 Check the link in the first thread YO! Quote Link to comment Share on other sites More sharing options...
nipper Posted December 19, 2009 Share Posted December 19, 2009 Check the link in the first thread YO! ?? I installed a hidden hitch on my 97, it was very easy. I just dont understand what you mean by 2" aside from the reciever. The Hitches on the link say they are 2" Quote Link to comment Share on other sites More sharing options...
MtnBikerChk Posted December 19, 2009 Author Share Posted December 19, 2009 ?? I installed a hidden hitch on my 97, it was very easy. I just dont understand what you mean by 2" aside from the reciever. The Hitches on the link say they are 2" yeah, 2" receiver as opposed to 1 1/4. My bike rack is a Thule T2 - designed for a 2" opening. The part that makes me nervous is this: Also, all three say "Exhaust must be temporarily lowered for installation, Minor heat shield modification may be required." Although I'm not doing it myself - I'd get help...... Quote Link to comment Share on other sites More sharing options...
Scoobywagon Posted December 19, 2009 Share Posted December 19, 2009 The exhaust rides right up against the uniframe, so you just disconnect a couple of the exhaust hangers so you can work. Then you reconnect them back up when you're done working on it. Quote Link to comment Share on other sites More sharing options...
backwoodsboy Posted December 19, 2009 Share Posted December 19, 2009 +1 on the rubber exhaust hangers. Not a big deal for the DIYer. Just be glad you got the Outback. The 09 & 10 Foresters... you have to remove the rear bumper cover and reinforcement to install the hitch. :-\ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.