redob Posted March 8, 2010 Share Posted March 8, 2010 Hi there! Just wanted to ask you folks if the OEM anti-nock sensor is any better or different from one purchased at NAPA or Advance Auto Parts. Would be for a 99 Legacy Outback. Thanks! Quote Link to comment Share on other sites More sharing options...
idosubaru Posted March 8, 2010 Share Posted March 8, 2010 (edited) There's no definitive answer to this question. Some folks will swear this needs to be an OEM Subaru part, others say they got brand XYZ with no problems. The answers will depend on who decides to reply. You get what you pay for applies but there's still a gray area and comes down to how you view risk, money, time, etc. Have you checked the online Subaru vendors - the aftermarkets may not be much cheaper, if at all, then those. Local dealers will often match those online prices (mine does). Follow the installation directions carefully and clean up the block/bolt. Edited March 8, 2010 by grossgary Quote Link to comment Share on other sites More sharing options...
davebugs Posted March 8, 2010 Share Posted March 8, 2010 There was actually a thread about this in the last year. Don't think it ever came to a real conclusion. Which probably means that aftermarket is o.k. Often I have agood used one - but am starting run a bit low. I use OEM myself when I need a new one. Not enough of a price difference to gamble for me. Quote Link to comment Share on other sites More sharing options...
nipper Posted March 9, 2010 Share Posted March 9, 2010 This part aftermarket is fine. nipper Quote Link to comment Share on other sites More sharing options...
redob Posted March 9, 2010 Author Share Posted March 9, 2010 Thanks to all for the info. I Truly appreciate it! Kinda new to forum but I think it is great, and there is a wealth of good info and folks here. Thank you! Quote Link to comment Share on other sites More sharing options...
Fairtax4me Posted March 10, 2010 Share Posted March 10, 2010 It shouldn't matter for a knock sensor. You could use one from a Ford or a Volkswagon it still works the same way. Quote Link to comment Share on other sites More sharing options...
nipper Posted March 10, 2010 Share Posted March 10, 2010 It shouldn't matter for a knock sensor. You could use one from a Ford or a Volkswagon it still works the same way. Nothing good ever comes of getting German and Japanese parts together. Quote Link to comment Share on other sites More sharing options...
ericem Posted March 10, 2010 Share Posted March 10, 2010 Just needs to be bosch...... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.