Ive got a 1985 brat if i cant find any to buy .. then i will have to find a place to build and paint me up a nice red roll bar and A bar so pictures would help me i can figure our measurements i will need ... My topper raises up so i can have one a few tinces taller than my cab.

this place makes them for Gen2 Brats...

 

http://www.truckrollbar.com/

here's a pic of one... http://www.indysworld.com/sterling-bar.jpg

 

Part# 310 @ $405.00 + motor freight

 

also, if you can go here http://www.indysworld.com/80s/

and look at the brat paint color examples. there's probably a few pics of rollbars in there... in the General section there's also a page of push bar pics...

 

here's a stock low bar...

http://www.indysworld.com/vehicles/1982-brat-red/2003-brat-2.jpg

 

and here's a stock high bar...

http://www.indysworld.com/vehicles/1986-brat-ltblue/86bt-lb-19.jpg

 

highbar and push bar...

http://www.indysworld.com/vehicles/1986-brat-ltblue/86bt-lb-9.jpg

here's a pic of one... http://www.indysworld.com/sterling-bar.jpg

Part# 310 @ $405.00 + motor freight

 

Mick, is the Sterling bar in this picture yours? I just got one of these exact units! Just curious about the wiring for the Hella's. I'm doing the same thing. Just wire poked out thru a hole or did you do some kind of plastic looming around it?

Mick, is the Sterling bar in this picture yours? I just got one of these exact units! Just curious about the wiring for the Hella's. I'm doing the same thing. Just wire poked out thru a hole or did you do some kind of plastic looming around it?

 

no, that's not mine... that's the picture Sterling just sent to me today....

Thanks guys i want a high bar but that one looks about 2 or 3 inchs too tall to fit under my topper ..wanna be able to use both but i almost never use my topper in the summer and just put it on and take it off once a year so maybe i will just get the ready made one .. I will call about a custom size. And i want them in red.

I saw a picture of a white in the subaru headquarters or some wear of a white

with red trim had a cool looking spoiler for above the cab also.. Gotta go look for that picture...

Thanks guys

just saw the peak in the attic red and white brat its and gen 1 mine is 1985 but same color scheme

if 3 people got together and wanted to pay me to bend them up some, i could.i do not currently have the dies, but if i got 3 folks to pony up 200 apiece, i could buy the dies, their tubing, and bend'em out.

i have a gen 2 brat local to test fit on.

no gen 1...

 

but they were originally 2 ", at least the several i have had , have been 2" .i found an old flange i had cut off once, downstairs.

and all of the bars i have had through here, have been the same size.i have def. had gen1 and gen 2 pieces through here.

 

 

i am just trying to add options . cheers, brian

Edited April 17, 201015 yr by monstaru