May 31, 201114 yr might need a bit of clearancing.those tires look like they might rub a little on the inside..zzz what size tires are those?
May 31, 201114 yr Author might need a bit of clearancing.those tires look like they might rub a little on the inside..zzz what size tires are those? They are well worn Maxxis Mudzilla LT 33x13.50-15 I might have to get rid of the back doors Front wheels are rubbing on lower spring plate. 2" spacers will fix that problem...
September 2, 201114 yr Author Nothing new really... Gearing was way off with mudzillas so i bought set of used 235/75-15 Bfg At's. Planning to try them out this weekend with hopefully not so much smoke from clutch ...might have to cut/regroove tires for better offroad/mud traction.
October 1, 201114 yr Rotate the flapper 180* so it opens toward the windshield.Otherwise it might get bent if you drive too fast forward.Sounds good though.
October 3, 201114 yr Huge update Tons of more power Your ride is quieter than mine!!! What exhaust you runnin?
October 3, 201114 yr Author Your ride is quieter than mine!!! What exhaust you runnin? Front pipe is stock followed by selfmade y-pipe with 110degree bend and a 16" long 2,25" straight trough muffler with somekind of a flame killer inside. Mufflers outer shell seems to be about 5".
October 3, 201114 yr Author If you were to do the back shortening again do you have any tips?Way cool idea, Just get lots of long sawsaw blades zzz ...and strengthen the roof before cutting.
October 3, 201114 yr Author Rotate the flapper 180* so it opens toward the windshield.Otherwise it might get bent if you drive too fast forward.Sounds good though. Hmm.... How fast is too fast? Flapper is made from 3mm steel (0,0762") so I don't think that i'm ever going to drive that thing that it bents with wind force.
October 3, 201114 yr Author What did you do with the fuel tank? There is a 20 liter fuel tank out of a Ski-Doo Nordic behind the passenger seat strapped down with some gargo straps. Mb 190E tank would be alot better. Its bigger and if i remember correctly it would fit between rear shock towers.
February 21, 201313 yr An excellent project! I have similar plans for one of my L-series - though I plan to make mine fully street legal...
February 21, 201313 yr Hmm.... How fast is too fast? Flapper is made from 3mm steel (0,0762") so I don't think that i'm ever going to drive that thing that it bents with wind force. Hmm.... How fast is too fast? Flapper is made from 3mm steel (0,0762") so I don't think that i'm ever going to drive that thing that it bents with wind force. I would say 50 MPH or better,May not bend the metal but might wear out/jam the hinge.Besides what happens if you find a low hanging tree branch with it?
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now