LeolaPA Posted January 23, 2012 Share Posted January 23, 2012 I'm thinking of getting a Bosch 15726 universal o2 sensor, but I read a review on one of the parts sites that said that it was physically too long. Has anyone here installed one of these? I have a 95 Legacy LSi with the 2.2 motor. I'm the person who has been struggling with the stalling when cold. Quote Link to comment Share on other sites More sharing options...
ocei77 Posted January 23, 2012 Share Posted January 23, 2012 Can't state whether it is too long or not, but if it is you can buy a spark plug nonfouler (@$3), enlarge the opening and screw the sensor into it. O. Quote Link to comment Share on other sites More sharing options...
Olnick Posted January 23, 2012 Share Posted January 23, 2012 . . . I read a review on one of the parts sites that said that it was physically too long. I won't pretend to be the final authority but I think that review was wrong. We put a Bosch universal--probably the same model number--on my son's '92 Legacy. Absolutely no problem with the fit. By the way check the prices on Amazon, it's around $35 there. Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted January 23, 2012 Share Posted January 23, 2012 I don't know if it was that Bosch part #, but I used a Bosch universal splice-in on my '96 2.2L some years back and it fit fine. Quote Link to comment Share on other sites More sharing options...
LeolaPA Posted January 24, 2012 Author Share Posted January 24, 2012 Tomorrow I will have the garage clean enough to bring the car inside, and I will measure it before I buy a new one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.