Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

85 wagon resto/build

Featured Replies

Well i might as well start a thread about my beloved wagon.

027.jpg

Edited by goblewagon

  • Replies 89
  • Views 15.1k
  • Created
  • Last Reply

Top Posters In This Topic

  • Author

well she is starting to show her age and while there isnt very much rust on her i figured i might as well get ahead of it before it gets any worse. So there was only one spot on the car were rust had gone all the way through right behind the rear tire on the passenger side and it was about the size of a quarter maybe a little bigger so i cut it out and welded in some new sheet metal. But i didnt think to take a before picture so this is after some bondo primer and stone guard

062.jpg

  • Author

Went to town and got a few things

086.jpg

080.jpg

066.jpg

now i just need a nice day:burnout:

  • Author

I was also kind of curious if anybody has tried rustoleum undercoating? i was just curious if it was as good as napa brand cause its alot cheaper

That is all the same stuff I've used!

 

The Rustolium undercoating is pretty good, all rustolium products are good.

 

May I suggest going to your local Farm&Fleet or FleetFarm and buying this? It is a High-Solids base enamel, they have it in Semi or Gloss black. Very good stuff, I've never seen a better black enamel. Rustolium doesn't even come close. Its about $5 a can.

2012_0318AI.jpg

Edited by TheLoyale

  • Author

Yeah i got alot of ideas from your safariwagon build thread lol. i'll have to look for some of that fleet coating sounds like good stuff.

I just noticed that "Chassis Black" paint you have is in fact a High-Solids base as well! Very good :drunk:

this looks like a page out of my 3-door build. Stone guard is the shizzle

 

Went to town and got a few things

 

080.jpg

 

now i just need a nice day:burnout:

I think I have a picture like this in the Safariwagon Resto thread Haha! Although, I got stuck with Stone guard white.

 

this looks like a page out of my 3-door build. Stone guard is the shizzle
  • Author

087.jpg

well got the drivers side rear wheel well mostly done:banana:

also i got bored waiting for paint to dry so i put this on one of my toolboxes:)

073.jpg

074.jpg

and its supposed to be nice tommorrow so im sure i will get more done:cool:

Those wheel wells look great! Please tell me you did remove any rust in them before coating it with Undercoating? If not, the Undecoating will hold moister and the rust will continue behind it (Which is also the down fall of the Factory/dealer applied undercoating)

 

Nice EA81 emblem! :burnout:

  • Author

ya i took off all the rust thats why its taking so long cause all i have been doing is wire wheeling with my drill and grinder lol

ya i took off all the rust thats why its taking so long cause all i have been doing is wire wheeling with my drill and grinder lol

 

Thats how I always do it, simple means. It does indeed take forever lol. Try de-rusting your suspension tube that way ;)

I also use napa rust treatment:cool:

 

Good stuff. Permatex also makes a very good rust treatment/reformer. Probably the best I've used and is only $4-5 each. You brush it on, it is a white paste. Drys clear and tubes rust black and smooth (Solid as well) It seals up rest awesomely. I used it on the rear tube and every where on the EA82 and the EA81.

 

You're doing a good job so far!

  • Author

well i got some more undercoating done:banana:

rear

004.jpg

drivers side

005.jpg

passenger side

001.jpg

and it was nice so she got a bath:cool:

007.jpg

now i gotta drop the rear diff somtime and scrub the heck out of it and paint it!

What's with your muffler being so far forward? And does it have the giant hole in it that it looks like.

  • Author
What's with your muffler being so far forward? And does it have the giant hole in it that it looks like.

i didnt think it was that far forward but i really have no idea i thought that was a cat? and yes it has a huge hole in it lol it has been like that since i got the car.

Oddest looking cat I've ever seen if in fact that's what it is. Hmmmm. Strange.

 

Gotta love the first series of these EA82s, mine is a September of 84 Car, so it's really one of the first 85s! Ha! I had an 86 before this one, and the quirks between the two are.....interesting. I'm REALLY not liking the mirrors being separated from the door like they are. They make an awful racket at speed with that little channel for air to flow through.

Edited by wentz912

  • Author
Oddest looking cat I've ever seen if in fact that's what it is. Hmmmm. Strange.

 

Gotta love the first series of these EA82s, mine is a September of 84 Car, so it's really one of the first 85s! Ha! I had an 86 before this one, and the quirks between the two are.....interesting. I'm REALLY not liking the mirrors being separated from the door like they are. They make an awful racket at speed with that little channel for air to flow through.

Yeah that was just my first guess either that or it has two mufflers which didnt make alot of sense to me.

That front "muffler/cat" is probably a resonator. I've had factory ones like that and ones shaped like a hotdog.

 

Doug

  • Author
That front "muffler/cat" is probably a resonator. I've had factory ones like that and ones shaped like a hotdog.

 

Doug

 

that was my next guess lol

  • Author

well i got myself a shovel it was on sale so i couldnt resist so tommorrow i am going to take a break from undercoating and fab up some kind of mount on my roof rack:banana:

  • Author

right well i was getting tired of undercoating soo....

001-1.jpg

i got this baby on sale so the shovel plus all the bolts i bought was about 15 bucks:cool: so then i went to work on a mount

cut out these

003.jpg

drilled some holes

006.jpg

made up this little mount

007-1.jpg

and then a little paint

012.jpg

view from the back

013.jpg

and the front

015.jpg

and on the car

016.jpg

017.jpg

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.