So I am doing an ej swap and I will not be having power steering or ac so I would like to find a serpentine belt that will only run the crank pulley and the alternator. Anyone know where to fine this belt napa just said "we dont sell them" and went on helping another customer so I'm hoping to find a part number that I can order offline. Thanks.

You are asking a lot from a busy counter person, for a size that is not known.

Since our belts are designed to go around the PS pulley, you have to measure around both pulleys with a flexible tape and get a belt a little larger so you can get it over the pulleys and still be able to tension it.

Don't be surprised if your first try is not successful and they won't accept a return.

Go to a Gates or other belt mfg site and try to narrow size down.

 

O.

It sounds like if you measure it like that even using a piece of string or dental floss that should get you plenty close. That alt seems to have quite a bit of adjustment in it for the belt tension.

http://www.ausubaru.com/forum/showthread.php?t=14676

Thanks for the info and the link Ill be ordering that belt and hope it works.