March 25, 201313 yr Alright, I think (hope) I have my problems figured out... Before I go and blow $9.63 for a standard parts store radiator cap to seal the deal, is that ok?? Do I need to run the OEM one? All I have seen when I searched was it doesnt hurt one way or the other, but I do suck using the 'search' functions on forums...
March 25, 201313 yr If you can find one that is of the same pressure rating and quality, it should be ok.
March 25, 201313 yr I bought a Stant for my legacy, it was good quality. It looked exactly the same as the original subaru ones did.
March 25, 201313 yr I recently bought one from Advance Auto Parts. Can't remember which brand, but bought one of their better ones. It works just fine. So, gotta think a good one from any parts strore will work just fine.
March 26, 201313 yr Author Alright... does anybody know the part number for the little bleeder screw thing?? As many times as I screwed with it, I loose it on the last time....
March 26, 201313 yr Alright... does anybody know the part number for the little bleeder screw thing?? As many times as I screwed with it, I loose it on the last time.... I would be surprised if it had a part number, if you are talking about the plastic bleeder screw on top of the radiator. It is simply a common screw/bolt. Suggest you go to a hardware store that stocks a wide range of screw/bolt/washer/nut hardware. Ace hardware or Lowes would carry it. You should be able to find one right away; prolly made out of metal not plastic. Use a plastic or fiber washer to create a good seal.
March 26, 201313 yr Author Really, wow did I get lucky.... I figured the dealer would charge like $3 for it and $2.95 for the gasket... i will go check out the local hardware store and see what I can find.
March 27, 201313 yr Radiator cap, I always use OEM. If it fails and doesn't let the cooling system open properly, you can have another sort of failure such as a blown hose or a blown head gasket. Seen a few that come in with blown head gaskets because of a faulty radiator cap or a partially restricted radiator.
March 27, 201313 yr Alright... does anybody know the part number for the little bleeder screw thing?? As many times as I screwed with it, I loose it on the last time.... I paid about $12-14 for the plastic bleeder screw from a dealer 3 years ago. It came with an O-ring. Certainly not cheap. This thing is hollow so it can be damaged easily by over tightening.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now