Anyone worked out if it is possible to replace burnt out bulbs in the heater controls?

I had a look took it to pieces but it seems to be a sealed unit?

Thank you

Thats next on my agenda..mine is a 2000 OBS, but I will post up how it is done. IIRC they simply plug into the back with bulb connector, you just have to take out the whole unit, which is a PIA if it is the cable style position unit. 

Edited September 2, 201312 yr by Mugs

Yes they can be replaced but you have to take the whole damn thing apart. You can get bulbs from radio shack. (Or at least you used to be able to)

Someone here had a writeup several year ago with pics, but the pics may not work anymore.

here ya go http://www.randomsoup.com/subie/how_acpanelbulbs.html

3 of these

 

if you want to do led replacements

3 of these

 

if you want to do led replacements

3 of each, or one of each..they appear to be in different sizes. I always thought it would be cool to replace all of my bulbs and have them be different colors. Like red for the CEL warning lights, green for dash, blue for heater control...etc etc. 

djmark, you seriously rock! Thank you all!

3 of each, or one of each..they appear to be in different sizes. I always thought it would be cool to replace all of my bulbs and have them be different colors. Like red for the CEL warning lights, green for dash, blue for heater control...etc etc.

Sorry, 3 of the 3mm ones that is checked when you go to the page.