Hi all.

 

I set up the O-scope the other day too test a optical disty before shipping it off.

 

Thought I would make a little video to show the process.

 

This particular disty is an 87....that was modified for  EA81 use.  So it looks a bit odd.....

 

This one had the round plug.....and in 87 the pins are different position on the ECU......so using different year dists can require swapping pins on the body side connector.

 

The wire colors on the distys themselves did not change over the years.

 

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid209.photobucket.com%2Falbums%2Fbb29%2FGloyale%2FIMG_1042_zps1b8d61b1.mp4&title=">

Edited April 24, 201411 yr by Gloyale

Nothing showing up unless it's my iPad:(

I extracted the URL out of that mess, but the vid is only about 30 seconds long and doesn't show the procedure 

http://vid209.photobucket.com/albums/bb29/Gloyale/IMG_1042_zps1b8d61b1.mp4

Well I can put a face to the name anyway:)

Sorry......Somehow the wrong video got uploaded.

 

I am workin on the good one.  Shoot....I might just refilm the whole dang thing.....I look like hell in that one.

 

Farkin Photobucket

Edited April 26, 201411 yr by Gloyale

Well I can put a face to the name anyway:)

+1

Sorry......Somehow the wrong video got uploaded.

 

I am workin on the good one.  Shoot....I might just refilm the whole dang thing.....I look like hell in that one.

 

Farkin Photobucket

Yep, I'll be able to spot you in a crowd.

 

Barkin Fotoph*cket indeed!