I have a 98 Subaru forester and have no spark to the injectors. The check engine light is blinking what do I need to do to fix both of these problems?

No spark to the injectors...?

 

I'm assuming the check engine light is on, what are the codes?

Welcome!

 

The Spark shall be to the Sparkplugs, or Power to the injectors.

 

You must get Readed the OBD II Codes and share them here.

 

Kind Regards.

The two things work completely differently from each other. 

 

Please explain so we can help along with mileage and transmission

Injectors don't spark.

Spark plugs are what make the spark.

If you have a blinking check engine light that indicates a steady misfire. This is usually due to worn spark plugs and old spark plug wires. Replacing those is always the first place to start. Use NGK brand for both.

Is the engine running while the check engine light is blinking or just when you turn the key on? There are test mode connectors under the dash that are not meant to be plugged together in normal operation, and if they are plugged together they make the check engine light flash.