Alternator blew out last night, happened to find another super easy alternator upgrade.

 

This alternator does not require a pulley swap unlike the altima alternator

 

 

Mine came off of a 1994 pathfinder v6. But I'm fairly certain that any alternator from a Nissan vehicle equipped with a naturally aspirated VG30 (3 liter V6) will fit. Only modification needed is to grind the inside (sides facing each other) of the mounting "ears" on the side with 2 mounts. There's a bolt sleeve type thing that you'll want to grind flat. Then get a small washer and put that in between the bracket and the alt when you bolt it on. Not 100% sure if the non pivot side mount fits onto our Stock bracket, but it appears it's almost the exact same size. (my brat didn't come with that bracket, I use a bolt coming straight up out of the engine to push up the alternator).

 

Wiring should be the same as the altima mod

Edited January 8, 201610 yr by comatosellama

Link to the alternator I'm taking about

 

http://www.partsgeek.com/gbproducts/DC/6749-05419994.html?utm_content=DN&utm_term=1995+Nissan+Pathfinder+Alternator+Remy+95+Nissan+Alternator&utm_source=google&utm_medium=ff&utm_campaign=PartsGeek+Google+Base&gclid=Cj0KEQiA2b20BRDj4buduIG-y9EBEiQAhgMGFf6L2-B0nP4IkSGr6f_PvSHLv8P1u6jwt-5nX7Cpv8YaAps38P8HAQ

And a picture of it mounted

 

http://m.imgur.com/WIuxNId

Nice share Also been told Nissan Patrol from late 80's will also fit, just need to retain the Patrol wire plug to connect to Subie wiring.

 

Pull your old alternator down to see if it is just brushes. Found worn brushes A$4 for a pair, $11 for new bearings 6203 front, 6201 rear yet to refit and test but pretty easy

Nice! I'll have to check this out. Have that exact engine in an 86 z31 300zx at the shop.