Hi, I know this question has been asked a lot on this forum however I aim to do as much research as possible into everything I do so I get it right the first time. I am on a fairly tight budget and would like to know a few things.

 

1. Will I be able to use the ej18 intake runners on the ej22 P2 block to get it to work

2. Will I be able to use the ej18 flywheel and clutch on the ej22 for the time being

3. Will the transmissions bolt up or will I need to install a different transmission

4 can I just get rid of the knock sensor and it (ej22) run fine

Kind regards~Abid

1. No. Bolt pattern is different. You can use EJ18 heads and intake tho.

2. yes

3. yes.

4. yes

1. No. Bolt pattern is different. You can use EJ18 heads and intake tho.

2. yes

3. yes.

4. yes

Ok thank you buddy, so I will just be able to bolt up the transmission up?

Edited July 8, 20169 yr by Aussiecanyoncarver