Hi guys, I recently redid the heads on my 1987 EA82 GL wagon, and after I had it all apart I realized that I didn't have new o rings for the camshaft case (or the cam tower itself for that matter)

I just used a little bit of the threebond form in place gasket to seal the small hole that sends oil to the lifters, but they tick a bit more now than they did before so I'm wondering if anyone knows where to get a proper o ring to seal it up. The dealer said they can special order them for me but it's $5 a piece and I feel like they're probably out there for cheaper somewhere.

Rock auto has the cam tower o rings and seals for $1.88 a set (I've learned my lesson on the actual seals and would only use the o-rings), but none of the little o rings that go between the cam case and the head.

 

 

Use only Subaru factory o-rings. Go to parts.subaru.com to order them and then pick them up at your local dealership. They’re $2.75 each.

Get the dealer ones while you still can. Even at $5 that is a bargain for quality parts. 

GD

13089AA010