August 6, 200421 yr As I understand it the only place to get parts is the dealer and since we now have an inside guy I figured I’d ask. I’m hoping to rebuild my RX tranny, its working well now, just a little stiff on the shifts (to be expected with 260,000 miles), so all I should need is bearings, seals, gaskets and syncros. Any info you could provide would be great, drawings, part numbers, pricing and such. Available as a kit or piece at a time? Gary
August 9, 200421 yr Author I'm sure I'm not the only one who might need some tranny parts so I'll give this the... Bump.
August 9, 200421 yr Oh, didnt see it...woops. Thanks for bumping it to my attention, I'll give it a look here in a few mins and see what I can find out...
August 9, 200421 yr Didnt see a rebuild kit type deal....looks like a painstaking peice by peice deal... Im gonna make a phone call and see if any of the higher up subaru people know anything.
August 9, 200421 yr DUDE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!~~!!!!!~!~!~! PN: 32000AB550 AY/TY75FCK2DV 1988-1989 F/T 4WDR-TURBO TWO are avalible!!!! USMB cost: $4156.23 Ok...on a smaller note...the gasket and seal kit: 6 are avalible PN: X3211AA001 4WD (ALL) and turbo trans seal/gasket kit $93.72 ive still not found an internal rebuild kit....
August 9, 200421 yr Called and searched some more...no "KIT" for an internal rebuild is avalible....it was sugested to go aftermarket for a rebuild or a kit for it....eh....i dont tihnk anyone knows taht these trans are out there anyhow... Otherwise, its a part by part deal.... :-\ Let me know...
August 9, 200421 yr Author Yeah, as far as I can find, nobody aftermarket does anything with them. I guess I'll look for a good used spare before I open mine up, once I know what I need I'll have to send you a list. Just to get an idea on price can you look up the price on the 1st gear syncro? Thanks for you effort Gary
August 10, 200421 yr It is highly unlikely that you need any synchros. What you need is to clean the "shellac" that builds up on them from heated tranny fluid and use. Definitely use the Genuine gaskets and seals...they're the only ones that fit properly. Emily http://www.ccrengines.com
August 10, 200421 yr Emily - does this apply to the 4 speeds as well? That third gear syncro seems to be a weak point..... Does CCR do trannys? That would be nice... GD
August 10, 200421 yr it seems as if the mobil 1 15w50 engine oil i used in my FT4WD trans cleaned that shellac off the syncros...as 4th was slow and 1st didnt want to cooperate above 15 MPH....now I can slam into 4th can get into 1st around 30.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now