Daskuppler Posted 14 hours ago Share Posted 14 hours ago Hello Everyone, I've got a '99 Impreza 2.2 5mt and a fried ECM. Are these interchangeable as long as it is for a 2.2? Is there anything special I need to look for when finding a replacement? Does anyone know where to find one? Is there any programming or other special concerns when replacing it? Cheers! Link to comment Share on other sites More sharing options...
wtdash Posted 7 hours ago Share Posted 7 hours ago This shows '99 only but AT and MT use the same: https://parts.subaru.com/p/Subaru__/Engine-Control-Module-ECM-Engine-Crankshaft-Position-Sensor-Bracket/49232072/22611AE510.html I'm not sure about the '99 being MAF or MAP based? If it has the MAF by the airbox then it's likley a one year only ECU, since I believe the '00-'01 EJ22 were MAP. Here's one on Ebay: 22611ae510 Link to comment Share on other sites More sharing options...
wtdash Posted 7 hours ago Share Posted 7 hours ago (edited) P.s.s this age they should be PlugnPlay - remove the battery cables 1st if you're not familiar w/the process. Also, check the EGI (?) fuse under the hood- the big one. Might have gotten blown, too. GL Edited 7 hours ago by wtdash Link to comment Share on other sites More sharing options...
wtdash Posted 7 hours ago Share Posted 7 hours ago And Car-part.com: 1999 Engine Computer Subaru Impreza 22611AE510 X AA0682 $125 Avalanche Auto Parts USA-CO(Denver) E-mail 1-303-722-3151 Link to comment Share on other sites More sharing options...
el_freddo Posted 54 minutes ago Share Posted 54 minutes ago I’d be working out what fried the ECU first! No use spending good coin on a replacement ECU only to have the same thing happen again! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now