I am looking for a standard 5 speed transmission for a 2007 Outback basic.  It has a sticker that says TY757VCDBA.  Mine is showing metal, noisy and is hard to shift into gear.  I changed the fluid.  It has new throw out bearing, master and slave.  When in gear you can still move the shifter back and forth like it’s in neutral.  Can I rebuild this and if so any hints on where to find the parts?  Any information is appreciated thanks!  

www.car-part.com is a good search platform.

Sounds like the shifter knuckle needs new bushes or to be replaced with a new unit. 

Be aware, if it's like the 5spd on my 06 WRX, the shifter is held on the shift shaft by 2 spring pins...1 INSIDE the other!

On 2/11/2026 at 11:49 AM, 1 Lucky Texan said:

Be aware, if it's like the 5spd on my 06 WRX, the shifter is held on the shift shaft by 2 spring pins...1 INSIDE the other!

I’m pretty sure they’re all like this from the L series onwards 😎