schreckman Posted September 2, 2003 Share Posted September 2, 2003 Anybody have a quick fix for the motorized seat belts on the Loyale? They dont move. One is stuck in the forward position and one near the back. Am I looking for a relay? A sensor? Quote Link to comment Share on other sites More sharing options...
Hondasucks Posted September 2, 2003 Share Posted September 2, 2003 Are you sure you aren't talking about a Legacy? I've never seen a Loyale with power belts. On my 91 legacy, under the center console lid was a allen wrench, if you pulled a plug out of the B pillar, (you have to slide the seat around to access it) and stuck the wrench in and cranked it, it would move the belt back to where it should be. Quote Link to comment Share on other sites More sharing options...
oregonloyale Posted September 2, 2003 Share Posted September 2, 2003 My 92 loyale has power belts. Quote Link to comment Share on other sites More sharing options...
schreckman Posted September 2, 2003 Author Share Posted September 2, 2003 Yes, I am quite sure. It is a 93 Loyale. I saw the allen head bolt. If I move it to the correct possition will it re-activate? Quote Link to comment Share on other sites More sharing options...
rallyruss Posted September 2, 2003 Share Posted September 2, 2003 I assume you checked the fuses ect. first? Quote Link to comment Share on other sites More sharing options...
schreckman Posted September 2, 2003 Author Share Posted September 2, 2003 Yes, all fuses are in good shape. I do not have a wire diagram for the car yet. My door sensers ( the ones that turn on the dome lamps) are in good shape as well. Quote Link to comment Share on other sites More sharing options...
calebz Posted September 2, 2003 Share Posted September 2, 2003 If I remember right, the switch for the power seatbelts is part of the latching mechanism in the door. Quote Link to comment Share on other sites More sharing options...
subieman Posted September 2, 2003 Share Posted September 2, 2003 Yeah my 91 Loyale's seatbelts stick in the closed position also. When I open the door I just stick my finger in the locking mechanism and move it around a bit. Low and behold the seatbelt moves back! Quote Link to comment Share on other sites More sharing options...
schreckman Posted September 25, 2003 Author Share Posted September 25, 2003 Well I found the problem. There is a computer that controls the seat belt motors. On the sedan it is located in the trunk below the speaker panel, right in the center. For some odd reason this one was unplugged. So I plugged it in and they work great. Quote Link to comment Share on other sites More sharing options...
Jeffk Posted January 22, 2005 Share Posted January 22, 2005 If I remember right, the switch for the power seatbelts is part of the latching mechanism in the door. My latch switch is sporatic on the drivers side but works ok with a screwdriver. Anyone had one of theswe out and adjusted it? Any links to subaru junkyards if I can't adjust it? thanks Quote Link to comment Share on other sites More sharing options...
erik litchy Posted January 22, 2005 Share Posted January 22, 2005 Well I found the problem. There is a computer that controls the seat belt motors. On the sedan it is located in the trunk below the speaker panel, right in the center. For some odd reason this one was unplugged. So I plugged it in and they work great. good job glad it was that easy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.