June 9, 200520 yr http://putfile.com/pic.php?pic=6/15916425267.jpg&s=x4 Hi, determinded to get this beast going - almost there but there are now one or two parts that I am not sure about and dont want to fire her up until I know everything I can do is done. Can anyone tell me what this part is and what it does -what would be the result of it being faulty etc, thanks a million
June 9, 200520 yr Author touch of trouble getting the image in -why cant I ever remember how to dot his! ok try again: arrghhh dont know what I'm doing wrong
June 9, 200520 yr Author yehhhhh did it. one small step for..... ok anyway, anyone know what that part is?
June 9, 200520 yr That is the boost (pressure) light switch. It closes at about .5 psi positive pressure. It should be connected to the intake manifold. Hope this helps
June 9, 200520 yr Author That is the boost (pressure) light switch. It closes at about .5 psi positive pressure. It should be connected to the intake manifold. Hope this helps thanks -good to know! what about if it's faulty? can the car run without it -properly, if the tubes are blocked off?
June 9, 200520 yr mine ran fine without it, the only thing that didnt work cause of it not being hooked up was the boost light.
June 9, 200520 yr That is the boost (pressure) light switch. It closes at about .5 psi positive pressure. It should be connected to the intake manifold. Hope this helps 100% correct. does not affect driveability of the car....but I like to have it working and hooked up properly.
June 10, 200520 yr Author Great -all thanks again, mine must be working as my boost light does work so all this worry for nothing!! Anyhow, I'm learning fast and I like to know what everything is for! thanks again, this board rocks!
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now