I'm gonna get my six lug done. So how do you take off the front and rear hubs?

cotter pin, axle nut, brake caliper (for discs), and pull. may want to seperate the hub from the disc for drilling (4 bolts)

cotter pin, axle nut, brake caliper (for discs), and pull. may want to seperate the hub from the disc for drilling (4 bolts)needlenose plyers, 36mm bolt, 19mm? might be 17mm bolts, and pull.. 4 bolts are 14mm

 

Rear, same except for the disc part.

Thank You berry much. I'm gonna take my hubs off today and take them to a machinist shop.

Andrew, it's straight forward. If you have trouble and need a hand, let me know I'll be free for the day shortly.

 

P.S.:: I want to see the wagon, duder.

Andrew, it's straight forward. If you have trouble and need a hand, let me know I'll be free for the day shortly.

 

P.S.:: I want to see the wagon, duder.

 

I got my new mud tires in today and got them mounted on my chrome yota rims. I just need lug swap, alignment, fix broken axle/cv joint, and fix stripped lift block bolt then I'll be ready to brawl.

Axle nut, cotter pin, 4 bolts that hold it to the rotor...DONE!

 

Same for front and rear.

make sure hes done it before, and make sure he doesnt ghetto it up.

i've seen some bad ones....not mine.

Anybody know what size mm the castle nut is?

36mm socket, unless you have a reman axle that has had its threads cut-down.

36mm socket, unless you have a reman axle that has had its threads cut-down.

 

Thank You