Are the rear differential bushings still available for an 89 GL-10? The rubber ones that go into the mounting points.

bump

i was working on an XT6 this summer that i had picked up and was going to sell. it had a brand new bushing in it, so they should be available. the entire part was new, the "top" plate of the rear diff carrier so to speak, not just the bushing. so i guess it comes as an assembly. i swapped it with the one in my daily driver since i had wanted to put one in anyway. the one in my daily driver was broken, cracked all the way through so i grabbed another used one i had lying around to install.

 

Subaru calls it a Support Bracket (it has the new bushing in it like i mentioned):

w/o Full Time 4WD Subaru Part Number 741321110 ($62.75)

w/ Full Time 4WD Subaru Part Number 41320GA060 ($73.20)

 

 

kind of surprised they list different part numbers...not sure what that means, but one of those should do you right. those are rough prices, might be able to get better through the online places.

I purchased a good used bushing w/plate for an 86 GL at a wrecking yard in Denver about 6 months ago for $10.00 and I didn't even have to remove it!

Yes they are still avalible.

 

I do not understand the 2 different PN's for FT and 4wd...they looks the same to me.

yeah i was curious about that too will. they're all swappable as far as i know, never heard or could imagine a difference.

same here about the 2 different part numbers.. I have noticed no difference in bushings. I'm running a AWD VLSD rear diff from a EJ22T in it, and everything was the same, except for the support bracket bolts. Either way they'd both work.

 

Someone got the ### for the mustache bar bushings?

we have them over at www.xt6.net

 

go to the Parts Wanted Forum and like the first thread is an XT and XT6 parts sheet, i've seen the rear mustache bar there.

the full time 4wd bushing is larger than the part time bushing.

Is there any aftermarket company that sells this bushing? Subaru quotes $100 for these now. Looks like they went up in price.

You could always make some.. see my 'how to' thread.

FYI, here is a great source., they were very knowledgable. Give it a shot

 

Outback Technolgies USA they have Polyurethane Suspension Bushings http://obtusa.com/

 

Amir

(914) 302-2431

sales@obtusa.com

 

 

Here are some EA82 part numbers for ref, the pricing is about 2years old and please double check part numbers with them.

 

Ea82 control arm kit SPF1691K. $35+shipping

 

Trailing arm complete bushing kit SPF1144K $89+ shipping

 

Shipping rates were not bad.

Edited February 28, 201313 yr by superpoo93