Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to remove that wood-looking sticker?

Featured Replies

Anyone know how to remove that wood applique from a woody wagon? I'm guessing it's the same as removing a large sticker, like a bird sticker on a Trans Am. I need to remove all the woody sticker from the 78 wagon before doing the body work.

A hair dryer or heat gun may soften it up a bit...

  • Author

Most of the sticker is dry and toasted.

Are you worried about the paint? If not, you can use aircraft paint remover (found at pretty much any parts store), this stuff will remove anything, down to the bare metal. If not, then you can get some glue and label remover that works ohkay, you jes have to put on one coat, then wait about 5 minutes, then apply another coat.

use a paint scraper and a heat gun and a lot of time but in the end, it'll all come off. Once you get the hang of it, it'll go a lot faster. I know all about removing those old Trans Am bird stickers from the hood:D

  • Author

I don't want to totally scratch the paint underneath, and avoid having to strip down to bare metal. Can I get glue and label remover at any parts store?

a blow dryer MIGHT work and if it did, not very well and you'd be at it 3 times as long than if you got a heat gun. Heat guns aren't very expensive and they pay off in the long run. Mine has paid for itself like 10 times over and thats no joke.

I've removed company logo decals from my trucks at work. The heat gun is the only way to go.

 

Instead of a metal putty knife, get one of the cheap plastic ones, and you will be less likely to scratch the paint.

 

Once you get a patch started, pull it back across itself as you continue to apply the heat.

 

Good luck

3M makes a decal remover that you chuck into the end of a screwgun or drill. Basically it's a big, round, pencil eraser for your car.

 

I removed all the pinstripes on my RX with it.

 

The older stickers just disappear.

The newer stickers, like one set of my pinstripes, leaves a bit of adhesive, I just got the rest off with WD40 and then cleaned it well and waxed it.

 

Check your local paint supply store.

 

 

 

Regards,

 

Jay

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.