Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

98 outback engine swap

Featured Replies

New to USMB

 

Live in PA bought a 98 2.5 DOHC outback for my son at U of Vermont, from a guy on ebay (Casey) in Montpelier VT. Long story short, the guy was a sleeze, car went about 1000 miles before engine started to leak from from and rear seals, bad clutch, stopped running on the way back to PA. Nasty clunking and grinding inside block.

 

Anyway I gonna pull engine to check heads and see inside condition.

 

Here's my question, if I need a new engine, I read that 95-98 will work, but will any more current, lower mileage engines work? Has anybody done this before? What needs to be changed? Is an Impreza or Forrester 2.5 DOHC engine the same? (Have done VWRabbits before where all blocks are basically the same).

 

Any help would be great!!!:brow:

all the DOHC blocks are the same. you can swap in a SOHC block and use it just fine. only thing is your compression will be a little lower, since the SOHC blocks dont have pistons that go outside the block at TDC. if you look over on nasioc.com, you will find alot of answers if you search.

 

 

~Josh~

This has been done a lot. The ideal option would be a phase 2 sohc 2.5 engine, but the are rare to find. as much as i love the 2.5 (i have 180K on my 97OBW) you would have to replace the head gaskets before installing the engine (to be on the safe side). Not a big deal since the engine is out of the car. The popular option is to put in a 2.2L. you will loose some power, but get better gas mileage. No matter what you choose, do replace the main seals, timing belt, tensioner, water pump and cam seals. Go with OE for the timing belt. If you replace all these you will have 100,000 trouble free miles from the front of the engine.

 

nipper

all the DOHC blocks are the same. you can swap in a SOHC block and use it just fine. only thing is your compression will be a little lower, since the SOHC blocks dont have pistons that go outside the block at TDC. if you look over on nasioc.com, you will find alot of answers if you search.

 

 

~Josh~

 

Josh out of curiosity what do you mean by "go outside the block"

 

nipper

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.