Well, since I have some newly aquired $$$...I am going to go with some Delta full out rally-spec competition cams. Gaskets Works' Copper Headgaskets, and an XT6 Clutch for my RX. I might invest in a lighten'd flywheel as well. Oh, it'll get a spyder tubo intake too. I found one...on an engine thats known good. It'll be the victim of of all of these racing goodies. Oh, dont forget the oil cooler too!

 

I'll be doing a proper lowering job and experiment with camber again...this time I'll move the control arm out.

Lucky Dog:drunk: Where in nc are you I am near Greenville SC?

Good! Some one making the cam leap before me. I would like to know... what duration of cams, and how much you are paying

 

When all is said and done, i'll probally be on your heels if it seems this is a good way to get more pep out of the old girls!

if you can get some of that camber to work on EA81s, id be very interested!

 

PS Tex, update your pics at the bottom of your posts!!!

I am near concord NC.

 

I think its got a duration of 270 deg, and a tad more lift. Its a rally spec cam, from Delta. $130 for the pair, and i send them the cores.

The "mild" cam is what I am going with. 260 duration with .42 lift. The other one was 272 duration with idk how much lift.