December 8, 200322 yr I was reading Warp3's thread about the oil dipstick poping out, and it made me recall that my transmission dipstick keeps poping out. Any suggestions?
December 8, 200322 yr Originally posted by Sweet82 Duct Tape? hell if your gonna use that, ight as well splurge the .10 and get a zip tie..
December 8, 200322 yr Author well I was actually just going to crip the cap down a little bit and see if it wouldn't stay, but I just wanted to make sure there wasn't any other reason that this is happening.
December 8, 200322 yr its gotta be from vibration(hopefully). just bend the little friction maker part out further, and it'll hold tighter.
December 8, 200322 yr you might want check the vent tube usually on top of the tranny it could be plugged and the pressure is blowing it out :cornfuzz:
December 8, 200322 yr Author Originally posted by junkyardgabe you might want check the vent tube usually on top of the tranny it could be plugged and the pressure is blowing it out :cornfuzz: Ah, good point. Although I think it was just loose. I gave it a little bit of a pinch and it seems to stay put now. (Of course, it'll probably build up presure and shoot through the hood now. LOL.....)
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now