We would like to have actual dyno #'s for our new website being built, and need a completely stock 2.5 sohc to take their car to Pacific Import Auto and run a dyno pull with all stock components, then pay to have them swap to our torque cams. Then after the swap run another dyno pull to see gains of cam swap alone.

any interest?

we pay for the dyno time and you keep the cams.

these guys are for real - they sure saved my bacon.

 

But I was doing a 2.2 not a 2.5

 

remember guys, the torque curves are really helpful to those who know how to read them

the torque curves are really helpful to those who know how to read them

wow, spoken like a true engineer!

Wow that sounds cool. I have a stock 2.5L sohc in '00 outback wagon.......unfortunately I am 2610 miles from Pacific Import Auto.....

not raining here ; ) ROAD TRIP !

not raining here TODAY, you mean...

 

(this is warshington - if you don't like the weather wait 5 minutes and it will change )

I've got a 2000 Outback! I'm in! When can I do it? Where do I need to go!

How much will it cost me?

Woo hoo! Cams!

nice heads

delta camshafts has a website

 

http://www.deltacam.com/

 

and a Tacoma phone number (I don't work there, I just dealt with them earlier in the week)

hehe yes that would make a nice roadtrip from Buffalo NY to Tacoma!. There was a great write up about Delta Cams in a recent issue of Subiesport or Sport Compact Car. If I can find it maybe I'll scan it in and post it, I learned a lot!

hehe yes that would make a nice roadtrip from Buffalo NY to Tacoma!. There was a great write up about Delta Cams in a recent issue of Subiesport or Sport Compact Car. If I can find it maybe I'll scan it in and post it, I learned a lot!

 

It was Subiesport. It was a good write up for sure. The guys at Delta will treat you right. I have been dealing with them for years. The last 6 yrs in Subarus. Jon and Scott will treat you right, every time!

 

Been sponsoring me for a long time.