Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

'86 Subaru Standard questions

Featured Replies

I got an '86 Subaru Standard yesterday for $100. I'm hoping it's going to be really good on gas. It's straight, has no rust at all, and it runs but I'm going to need some parts (clutch cable, maybe a clutch, needs exhaust leak fixed). I'm not finding a lot looking for Subaru Standard, so I was wondering if i should just look for parts for an EA71 or DL or GL hatchback or what? Thanks for any help.

first off.figure out what motor you have(stamped on the block nextish to the disty.

that will tell you ea71,ea81 etc.

 

next,the gl dl is just a trim package.

 

hatches are the same beast as brats in that,the years go beyond the normal ea81 yr range being 80/81 to 84.

 

so find out your engine style and you can pretty much go from there.then do you have a d/r transmission?meaning a dual range 4 wheel drive?all basic stuff that i am sure you will pick up easily.cheers, and good luck,there is plenty of knowledge here for you.cheers, brain

if its truly a subaru standard (STD)

 

the back likely just says subaru. I think it has an EA71 and round headlights. should get in the 30's or 40's on mileage

+1 for 1.6L/EA-71 :) I checked out some parts sites and they all point to a 1.6L & an EA-71 fits the bill.

 

 

Which brings up the obvious - just ask for parts that fit a Subaru Standard. Each parts store have automatic interchange part info as aftermarket parts seem to be oh-so generic these days.

  • Author

thanks for the info. It is a 1.6 EA71, 2wd:-\, but that's okay since I have my Brats and I'm going for good gas mileage. Some of the parts stores don't seem to have a listing for a Standard so I just wanted to make sure that if I told them a DL hatch it would be the same.

Tell them its like an 84 DL... as long as it has an EA71/1.6L listing, you'll be fine.

I love having an online account with NAPA :)

 

Here are some part numbers for you. These are for a 1986 1600cc 2 door (which you have).

 

Clutch Cable: ATM 0743005

Clutch Kit: ATM 0763001

 

Those are NAPA part numbers. :)

  • Author
ttiwwop

 

too bad you caugha a SDT I thought people try to avoid them :lol:

 

ttiwwop (I can't figure this one out), SDT (or this one, either). Geez, do I feel old!! Please explain them to me.

 

After looking at it, we found that it didn't need a cable or a clutch. The spot weld broke where to cable connects to the clutch pedal. All it needed was a quick weld :banana:. We're going to find the exhaust leak in the morning then run it through emissions. I'll post some more pictures tomorrow

 

DSC00377-1.jpg

standard (STD)

 

Ummm Duhhhh

 

New Vehicle purchase = pics for us to see:lol:

 

ttiwwop (I can't figure this one out), SDT (or this one, either). Geez, do I feel old!! Please explain them to me.

 

 

this thread is worthless without pics

ttiwwop

:rolleyes:

 

ea71 is fun :burnout:

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.