Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

security light blinking contantly!

Featured Replies

Last year when I bought my WRX, it had a bad alternator, and had to be replaced of course. After it was replaced, I noticed that the security light in the dash blinks constantly. Is there anyway to reset it, or have it only blink when the I lock the car ?

I would disconnect the positive side battery cable for about 15 to 20 minutes, then reconnect, and hopefully the reboot will solve the problem.

[...] I noticed that the security light in the dash blinks constantly. Is there anyway to reset it, or have it only blink when the I lock the car ?

Is there a particular pattern to the blinking (x number of blinks, pause, etc.)?

See: http://www.cars101.com/subaru/keyless.html

I would disconnect the positive side battery cable for about 15 to 20 minutes, then reconnect, and hopefully the reboot will solve the problem.

 

i would try something else first. try locking and unlocking several times from the inside with the door closed.

or

look for a push button under the dash, press and hold with the key in each position.

or

i guess you have already tried using the remote.

 

if i disconnect my battery, it reads that as a security issue and turns off my ignition. i'd like to disconnect mine since i don't have a remote, but unless i paid the dealer to do it i'm concerned that i'll disable my car altogether.

i wish the light on m SVX would blink. Instead its solid, which means need to replace module, $$$

 

I have it out of the car, trying to see if it will reset, but all i keep reading says solid light is doom. Newer modules were fixed, mine looks like it has a revision printed on it, but ...blah

  • Author
Is there a particular pattern to the blinking (x number of blinks, pause, etc.)?

See: http://www.cars101.com/subaru/keyless.html

 

there is about a second between blinks. I think I am going to try the sugesstions on the link that OB99W gave me....I'll let you guys know what happens.

:grin:

Sounds like the classic SLOW 4way blinking.

 

Never quite understood is since the car will start and drive.

 

That cars101 link should tell you how to reprogram/reset the security system.

 

First WIND WINDOW DOWN - yes I've locked myself out a few times doing this. Part of this is that it cycles the locks.

 

Second I'd get the car in the air - even ramps. They purposely bury that black button under the dash if it's like the late 90's Legacy's. You'll need a light at well.

Security system is in Valet mode - push unlock on fob - open drivers door - hold unlock button on fob until light stops flashing

 

Hope that helps

SEA#3

  • Author
Security system is in Valet mode - push unlock on fob - open drivers door - hold unlock button on fob until light stops flashing

 

Hope that helps

SEA#3

 

I saw that on the cars101 link that I got from OB. Tried it as soon as I got off work and went out to the car...SUCCESS!!!!! :banana:

 

The light is gone!! YESS!!! Thanks everyone for the help :grin:

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.