i was wondering, i got a bunch of 98 legacy outback 1.5inch subframe spacers that im going to use to help with my CV angles and such.

 

my question is am i going to have any issues with my shift linkage or anything with adding the spacers.

 

Thanks,

Shean

i was wondering, i got a bunch of 98 legacy outback 1.5inch subframe spacers that im going to use to help with my CV angles and such.

 

my question is am i going to have any issues with my shift linkage or anything with adding the spacers.

 

Thanks,

Shean

 

probably not with just 1 on the front crossmember

Dont forget the steering shaft.

ya cool i talked with scott and he lined me up with what to do to help with the CV's rubbing on the frame.

 

so tomorrow i hope to remember my welder so i can extend my steering coupler as well as get the 1.5inch blocks in the front sub-frame & tranny mount.

ya cool i talked with scott and he lined me up with what to do to help with the CV's rubbing on the frame.

 

so tomorrow i hope to remember my welder so i can extend my steering coupler as well as get the 1.5inch blocks in the front sub-frame & tranny mount.

 

 

check those newer cars at your yard, might find a longer steering part that works, if so tell us SJR

I know when I dropped my front crossmember 2" on my brat i used one out of an outback

yep , outback it is.i got about 25 once for allied armament.that was a rad deal.cheers, brian