Jump to content
Ultimate Subaru Message Board

Connecter under dash driver side (w/pic)


Recommended Posts

I'm going to expand on what Sir Nipper stated...hopefully live to tell about it.

 

The green connectors are used for 'active' reading of CEL codes. On the Legacy from '90-94 (and maybe your '00) there's also a set of black connectors used for 'stored' codes. Both sets may or may not be next to each other, but usually on Legacys are under the driver's side of the dash, as in your pic.

 

Here's a LINK about using them on older Subies, but I DO NOT Guarantee the results are the same on your '00.

 

There is a recent post on this site about doing this on the OBD2 cars, and it includes the code #s and descriptions...but can't find it right now.:mad:

 

However, my DISCLAIMER is that if/when you do have a CEL, take it to a place w/an OBD2 scanner to get it checked.

 

Good luck,

TD

Link to comment
Share on other sites

THAT green connector is not for "our" use as Nipper described. There are green connectors elsewhere on your car that are not for diagnostics. Each model is slightly different so it's not fair to say ALL green connectors are for diagnostics. Case and point would be 93-?? Imprezas have a green connector like that under the driver's side dash for diagnostics, but under the dash on the passangers side is an identical connector that goes up to the dome light.

 

Keith

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...