WJM

$200 for a full set of slotted rotors...8 slots front and 6 for the rear. Or...$100 for either the front or the rear. Who would be interested?

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

As stated before....YES. THEY WILL ALL FIT AS IF IT WERE AN EA82 CAR...damnit. :-p

Where oh where is Top Speed......

Thigns like coilovers for the RX from either DMS, JIC or D2?

*SIGH*

http://www.fulcrumsuspensions.com.au/superpro.html

28mm control arm bushings are the ones for you.

eh?

whats listed is all they have.... :-\

I believe it falls under "sponsorship" as far as the cost.

Like YOU. :-p

I'll have it next week and installed for the next dyno run on the 26th of this month. The cost is top secrect.

VF7 catridge...13G (aka the TD04 13G that comes on the WRX) compressor wheel and ported VF7 compressor housing for that....and the exhaust side is Deadbolt Enterprises Port and Polished with a black hole waste gate (no more boost creep!).

A local vendor out of atlanta, Top Speed, has offered to order a crap load of bushings for our cars.....since you can only get them from Australia (for us non-OZ folks). Here's the listing: The front control arm kit retails for $50, and the rear trailing arm kit for $60. We might or might not get a better deal...however, they are willing to go thru the trouble and order them and get them here within a month (which is FAST considereing normally it takes about 3 months to get something like this) and not charge us extra freight. To get them within 3~5 days it would cost about $75. The vendor and I have talked and he should be posting in here as soon as he can get a full price list. Either way, with or with out other USMB orders, I will be buying some bushings and I will not be ordering extra to "stock" as I dont have the capital to be able to do so. How many people do we have that would be 100% seriously interested in buying bushings at this time?

when it starts screaming under boost is when you know.

any good suggestions on grounding? i just ran a nice double 12 guage wire set from the batt to the alt bracket and from there to the strut tower...seems to run better...and the fuel cut gremlin is not so bad...but still there....

this is interesting.

Ditto.

My GL-10, 1986 MY, has the body colored painted bumper. The RX does as well...1987 MY...in general, most are whats called 'textured' instead of black or colorless.

Super Pro....dunno anymore than that.

both sides just like the control arms.

40% for 2WD me thinks.

you should replace the followers. Springs and stock HVLA's are ok as long as the HVLAs are clean and you are using the 260 grind. The 272 is the one you should get springs and solid VLA's for.

SPF1691K $49.99 SPF1144K $59.99 Have to order from OZ.