Tbird Man

I think if your cutting and weilding anyway why not squeeze in an EJ20 . It might need to be stretched in the front a bit and the rad moved to the back or the hood maybe. but it could be made to fit.

I wasn't aware of the justy being the same as a swift, have to research that but i don't think it is. as for the swift motor the GTi motor should fit but you may or may not need an adaptor made.

at 102 rpm you wouldent get much wheelspin...but you could pull an office building.

heh, talk about bolting a car to an engine, that thing is over 3 stories tall. and I think 5,608,312ft/lbs of torque at 102 rpm might be a bit much for your stock tranny.

This sounds like a killer idea, you might be able to fit some turbos up front behind the head lights with one light on each side removed and replaced with a filter. It would still be tight though. or you could stick with NA for simplicty(remember these are NA motors, turboing them is ALOT more involved than bolting them on.) and do some NA power mods like porting and polishing and headers.

I want this engine in my prezza...(before you say something smart, yes i know it will not fit, but a guy can dream) http://www.iwoc.co.uk/subf1.html

Hey I am new here, and was doin some cruseing and found this topic, here in NC you can get a decent justy for about 300-400 bucks so this intregued me. I have herd from somewhere that the justy uses a the same engine as the suzukie swift and geo metro though I am not too sure about this. If so could you not swap a 4cyl from a swift Gti? that would make for one fun beater.