Tha_BluJay98

Where should I look? Everything looks solid

So I dropped the clutch in 1st at about 5k rpms in some loose gravel to try to drift, the car bogged out hard but continued to run. Then the CEL came on and it idled high around 1200 rpm instead of the usual 5-600 rpms. Then after finding out auto zone couldn't run my codes I tried to drive home. After about 15 minutes The car bogged out under light throttle at a stop light trying to move in 1st. Then it wouldn't start after that. Plugged the black CEL memory cables in and turned the key to ON. now it's throwing codes 16, 17, 22, 23, 24, 35, 42, and 49 when the CEL was never on before. The car won't start at all just cranks and cranks until the battery dies. All stock ej22t awd 5 speed manual

Ej22t 185k miles awd stock turbo

I went to drop the clutch at around 5k rpms in first in loose gravel and it bogged out hard, after that the CEL turned on and it was idling around 1200 rpm. Went to take it to auto zone to run the CEL and said it was too old that obd1 can be ran on a subaru by connecting the green plug on the left hand side under my dash and it will flash to accomodate which code it's throwing. Then I went to drive home slowly and the car bogged out hard at a stoplight going into first around 2000 rpms and now it won't start at all. It also won't throw a code because I can't start the car.