Speedwagon Posted November 5, 2009 Share Posted November 5, 2009 Currently, CAP has a million of the C4C vehicles, but they ditched all the EAs and such to make room for them. So what other junkyards in the area normally carry these cars? Quote Link to comment Share on other sites More sharing options...
NV Zeno Posted November 5, 2009 Share Posted November 5, 2009 IIRC, there's a place that specializes in Subaru parts, old and new, in the Denver area called S-Wing's Stuff. I've purchased parts for my '83 from them, good guys to work with. 1196 Bannock St., Denver 303 777-8658 Hope this helps Quote Link to comment Share on other sites More sharing options...
zyewdall Posted November 5, 2009 Share Posted November 5, 2009 (edited) Superrupair in Boulder still has some EA parts in storage, but they've shifted mostly to the EJ cars in the last three or four years Whats a C4C vehicle? Edited November 5, 2009 by zyewdall Quote Link to comment Share on other sites More sharing options...
bheinen74 Posted November 5, 2009 Share Posted November 5, 2009 c4c = cash for clunker Quote Link to comment Share on other sites More sharing options...
crazyman03 Posted November 5, 2009 Share Posted November 5, 2009 Colorado auto Recycling has a few of them in the 80's range. didnt see anything older than '85 though. off of Sata Fe and Oxford...ish -Justin Quote Link to comment Share on other sites More sharing options...
bheinen74 Posted November 5, 2009 Share Posted November 5, 2009 CAP a year ago http://s405.photobucket.com/albums/pp132/bheinen74/denver%20subie%20junkyard/ Quote Link to comment Share on other sites More sharing options...
zyewdall Posted November 5, 2009 Share Posted November 5, 2009 c4c = cash for clunker Oh.... of the 10 vehicles I have, NONE of them get bad enough gas mileage to qualify Quote Link to comment Share on other sites More sharing options...
Speedwagon Posted November 5, 2009 Author Share Posted November 5, 2009 Colorado auto Recycling has a few of them in the 80's range. didnt see anything older than '85 though. off of Sata Fe and Oxford...ish -Justin Have you been there recently though? I was there a few weeks ago, and the oldest they had was a Legacy(maybe a Loyale too). CAP is the yard I frequent the most. Quote Link to comment Share on other sites More sharing options...
crazyman03 Posted November 7, 2009 Share Posted November 7, 2009 its been a couple weeks or so. so i dont know at the moment. Quote Link to comment Share on other sites More sharing options...
Speedwagon Posted November 7, 2009 Author Share Posted November 7, 2009 I swung by there today. They are starting to get the EAs back in stock. Had a few Loyales, an early 80s coupe, and ~83/84 wagon or two. They still have a million of the C4C trucks though. Almost the entire left side of the lot as you enter is trucks now! Quote Link to comment Share on other sites More sharing options...
the sucker king Posted November 7, 2009 Share Posted November 7, 2009 Speedwagon, The number of yards with the old ones is fewer and fewer every year. This one: http://aurora.upullandpay.com/PriceGuide.aspx is currently the best. there are usually a few ea81 and a bunch of ea82 cars. They recently opened or aquired another in denver: http://www.upullandpay.com/Locations/denver/default.aspx I haven't been to this one yet, let me know what you find if you go. Definately check out the one in Aurora, though. There is also this place: http://www.pullnsave.com/weekendspecials.htm which until a few years ago was the best in all the land. Very few ea cars there these days, but worth a look. It's a shame about CAP. Used to be a great place. last time I was there I think they had one ea81. I gotta get used to the fact that there are not as many of these cars left as when I first got in this game. U pull and pay has a place in Co Springs as well. good luck and let me know what you find. In fact, keep me in mind if you see ANY Gen1 gars at all. Quote Link to comment Share on other sites More sharing options...
ar design Posted November 7, 2009 Share Posted November 7, 2009 What do you need? I have some spares. Quote Link to comment Share on other sites More sharing options...
Speedwagon Posted November 8, 2009 Author Share Posted November 8, 2009 (edited) Speedwagon,The number of yards with the old ones is fewer and fewer every year. This one: http://aurora.upullandpay.com/PriceGuide.aspx is currently the best. there are usually a few ea81 and a bunch of ea82 cars. They recently opened or aquired another in denver: http://www.upullandpay.com/Locations/denver/default.aspx I haven't been to this one yet, let me know what you find if you go. Definately check out the one in Aurora, though. There is also this place: http://www.pullnsave.com/weekendspecials.htm which until a few years ago was the best in all the land. Very few ea cars there these days, but worth a look. It's a shame about CAP. Used to be a great place. last time I was there I think they had one ea81. I gotta get used to the fact that there are not as many of these cars left as when I first got in this game. U pull and pay has a place in Co Springs as well. good luck and let me know what you find. In fact, keep me in mind if you see ANY Gen1 gars at all. The Denver store actually shows a 1982 Brat right now! Ima check it out Sunday. http://www.upullandpay.com/Locations/denver/Search.aspx What's the easiest way to pull a junkyard trans? Remove the engine/trans together with one of the A-frame hoists? Or drop just the trans from underneath? Edited November 8, 2009 by Speedwagon Quote Link to comment Share on other sites More sharing options...
the sucker king Posted November 8, 2009 Share Posted November 8, 2009 The Denver store actually shows a 1982 Brat right now! Ima check it out Sunday. http://www.upullandpay.com/Locations/denver/Search.aspx What's the easiest way to pull a junkyard trans? Remove the engine/trans together with one of the A-frame hoists? Or drop just the trans from underneath? Drop the trans from down unda. Pull the torn up seat out of the car and slide it under the transmission and drop the trans onto that, crude and fast style. last bolts you remove are the crossmember bolts. everything else first. let me know what else you see at that jy. Quote Link to comment Share on other sites More sharing options...
the sucker king Posted November 8, 2009 Share Posted November 8, 2009 last bolts you remove are the crossmember bolts. and KEEP YOUR ARMS OUT OF THE WAY! Quote Link to comment Share on other sites More sharing options...
Speedwagon Posted November 9, 2009 Author Share Posted November 9, 2009 (edited) I found 3 cars with D/R 5 speeds today. Quite a few EA82s, and a couple EA81s there. Here's some pictures I got from the two yards Denver U-Pull-and-pay: Are the brat seats complete in the picture? Or do they look like they are missing parts? Basically, are they worth grabbing or not? Colorado auto and parts: I'll be going back tomorrow, to pull a 5 speed. If any of the locals are interested in coming along to help, I'll gladly pay your $2 entrance fee. Edited November 9, 2009 by Speedwagon Quote Link to comment Share on other sites More sharing options...
the sucker king Posted November 10, 2009 Share Posted November 10, 2009 Brat seats are almost always worth grabbing. Hard to tell from the pics how complete they are, often times the pistol grips are cut off of them because you can't squeeze much more than a child's rump roast between them. Even so, the plastic seats in good condition are almost always worth grabbing as well as those headrests, and be sure to grab them complete with the sliders. From the pics it looks like there is no longer a mounting frame for the seats welded to the bed. Whenever you find rear seatbelts for a brat, they are worth getting. When I say this stuff is worth getting, I mean they are rare enough you can always unload them for a more than you paid. You won't get rich, but these parts are easy to remove and as a subaru fanatic I actually enjoy saving these parts from being crushed. What is the light blue gen 2 car in the pics, and were any of the gen 2 cars you saw in really good shape, inside or outside? Quote Link to comment Share on other sites More sharing options...
Speedwagon Posted November 10, 2009 Author Share Posted November 10, 2009 Brat seats are almost always worth grabbing. Hard to tell from the pics how complete they are, often times the pistol grips are cut off of them because you can't squeeze much more than a child's rump roast between them. Even so, the plastic seats in good condition are almost always worth grabbing as well as those headrests, and be sure to grab them complete with the sliders. From the pics it looks like there is no longer a mounting frame for the seats welded to the bed. Whenever you find rear seatbelts for a brat, they are worth getting. When I say this stuff is worth getting, I mean they are rare enough you can always unload them for a more than you paid. You won't get rich, but these parts are easy to remove and as a subaru fanatic I actually enjoy saving these parts from being crushed. What is the light blue gen 2 car in the pics, and were any of the gen 2 cars you saw in really good shape, inside or outside? The blue one is a wagon. I don't think any of them were spectacular inside or out though. A few were not bad as I recall, but I didn't take great notice of them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.