That's right. This bumper

without the spare tire holder for $150. EA81 and EA82 Wagons Only.D-rings and hitch included. Shipping not included.

And this bumper is $150 too...

Call this Head Trauma, inc's version of a stimulus package. I want to get my product out there. We could make arrangements for pickup at WCSS. Half paid on order and half payment upon shipping is doable. Private message orders to me.

Edited August 2, 201015 yr by [HTi]Johnson

so whats the cost with tire holder. my brat doesn't have a tailgate so would it still bolt up?

The tire holder is too much of hassle. The bumper should still work for the brat.

How low does the rear bumper sit? Do you have to put a bend down in your tail pipe to clear the bumper or does it sit high enough for a straight pipe to clear it. If not, can you cut a curve out like the factory bumper for the tail pipe? Do you have any other pics of the bumper to post? I seriously want to get one soon! Thanks!

Any info???:-\

I haven't had any complaints of the bumper interfering with the exhaust, but a notch could easily be put in place.

 

How low does the rear bumper sit? Do you have to put a bend down in your tail pipe to clear the bumper or does it sit high enough for a straight pipe to clear it. If not, can you cut a curve out like the factory bumper for the tail pipe? Do you have any other pics of the bumper to post? I seriously want to get one soon! Thanks!

Johnson;943843']I haven't had any complaints of the bumper interfering with the exhaust' date=' but a notch could easily be put in place.[/quote']

 

Thanks for the info. Does the bumper wrap around the corners of the car at each end or is it just a straight piece across the rear? Any pics of this would be great! Thanks!

Here's TRUE2BLU's Ride....

 

Thanks for the info. Does the bumper wrap around the corners of the car at each end or is it just a straight piece across the rear? Any pics of this would be great! Thanks!

Great, thanks! I'll send you a PM in a week or two with my order.

Got mine on order see you at WCSS12 :banana:

are these still available?

Yes, still available. PM for further information. Sorry, I've been put out for a while, involved in a head on. But I'm ready to rock!

are these still available?

Id LOVE a set of these but i think shipping would be outrageous... =[

 

Would you be able to ship? Id consider it if the prices arent too bad.

Id LOVE a set of these but i think shipping would be outrageous... =[

 

Would you be able to ship? Id consider it if the prices arent too bad.

 

Yes, able to ship. I haven't been in my shop for awhile, as I'm partnering with another iron work company. But I can get some quotes.

how much to ship to los angles ca 91301

how much to ship to los angles ca 91301

 

Shipping is about $70 for a front and rear bumper.

Not to be picky but could you make a bumper like the picture above with some metal filled in under the taillights. It just bugs me theres a huge gap there.

Not to be picky but could you make a bumper like the picture above with some metal filled in under the taillights. It just bugs me theres a huge gap there.

 

Yes, I started adding pieces to address the gap.

How much would shipping be to Danville PA, 17821?

 

If they're still $125 a piece I may be willing to pick up a set if they dont cost a fortune to ship. Also, are you able to do a tube bumper for the rear similar to the front one? If you're able to do that Id probably be more interested in the tube rather solid plate but either way, Id interested in a shipping quote.

 

Let me know, either through the thread or PM. Thanks!

Edited February 16, 201115 yr by ghost

Bumper still available? Lmk. Very interested in a rear one.

BUMP!

 

I'm interested in a front and rear for my 88' GL. No spare tire holder on the rear would be needed. Let me know asap!! Thanks.

 

-Cody

Email all inquiries to sales (at) hti-fab.com

Can you make a tube rear like the front?

Yes. Please email me here at sales (at) hti-fab(dot)com

 

Can you make a tube rear like the front?