-
Posts
48 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Store
Everything posted by Kyle691
-
They have relay unit that controls the fuel pump when the car is running. If the relay is bad it won't turn the fuel pump on. I had to wire the fuel pump to come on with the key in one of mine before. I've also had the rear fuel filter completely clogged.
-
EA81 Rocker Arm Inspection and Reassembly
Kyle691 replied to Sapper 157's topic in Old Gen.: 80's GL/DL/XT/Loyales...
Service manual says Clearance between rocker arm and shaft:.0005-.0020 Inner diameter of rocker arm:.7093-.7100 Outer diameter of shaft:.7080-.7088 I know the location of the spring washers on the shaft is important. Not sure if the direction is. -
Moustache Bar Bushings?
Kyle691 replied to Naked Buell's topic in Old Gen.: 80's GL/DL/XT/Loyales...
This might help. http://www.ultimatesubaru.org/forum/topic/146014-bushings/ -
webercarbsdirect-Have i been burned?
Kyle691 replied to 87subbomber's topic in Old Gen.: 80's GL/DL/XT/Loyales...
I did the same thing about two years ago. The only issue I have had so far is the choke screws backed out. Which could have been loose when I received it. So I took it apart and used some medium loctite to hold them in and haven't had a problem since. -
Spring meet (nothing big) Edmonds WA ?
Kyle691 replied to one eye's topic in Meet n' Greet. Your USMB Welcome Center
How late are people going to be there? -
wrx seats in a 2nd gen brat?
Kyle691 replied to d8usti5n's topic in Old Gen.: 80's GL/DL/XT/Loyales...
I installed RS seats in my brat. If you use the brat seat brackets the seats sit lower to the floor. Not to sure if you gain leg room. If you use the seat brackets from the original brat seats it isnt that hard to do and seats sit low. Cut a couple pieces of steel and drill some holes. But if you modify the RS seat brackets to work the seats sit pretty high. This was also a bit more work. -
Help me hook my ea81 back up after engine swap
Kyle691 replied to andrsn's topic in Old Gen.: 80's GL/DL/XT/Loyales...
Did you get this solved? -
Pretty cool! Have any other pictures of the brat? Did it come with the cowl on the roof?
-
Leeroy is correct about the ea81 not mounting to the top Mount starter transmission. I just did this swap over the weekend and had to use the ea81 transmission because they do not line up. Also depending on what type and year ea71 car you have there is a couple other little things that need to be changed.
-
Motorweek's review of the 82 BRAT
Kyle691 replied to subarubrat's topic in Old Gen.: 80's GL/DL/XT/Loyales...
That was awesome. Wish my brat moved that well. -
Should I buy this rotted out BRAT?
Kyle691 replied to jmoss5723's topic in Old Gen.: 80's GL/DL/XT/Loyales...
I'd give you 50$ for the roll bar. -
Did you have a hard time putting that on? Any pointers?
-
Pics would be awesome. I have been debating on this for a long time haha
-
Thanks!
-
I know this is a old thread but did you ever get the third light sorted out? If so where did you end up hooking the wires from the switch to?
-
Looking for people to donate their time
Kyle691 replied to BajaBratWA's topic in Meet n' Greet. Your USMB Welcome Center
Post some pics. I live in lake stevens. I might be able to help out with some of the wiring. -
The Awesome Older Generation Picture Thread
Kyle691 replied to 6 Star's topic in Old Gen.: 80's GL/DL/XT/Loyales...
Haha thabks. It was late,I was tired. -
The Awesome Older Generation Picture Thread
Kyle691 replied to 6 Star's topic in Old Gen.: 80's GL/DL/XT/Loyales...
How or where to you find that awesome tunnel cover? -
"Pro" heater core quality
Kyle691 replied to spazomatic's topic in Old Gen.: 80's GL/DL/XT/Loyales...
Wish i saw this post sooner. I did the same thing you did. The heater core didn't work from rock auto. After i sent some pictures they accepted it and gave me my money back but i was out on the shipping charges. I have bought to from the local part store (o'reilly's) and they have lined up and worked great. -
which distributor for brat?
Kyle691 replied to lostbrat's topic in Old Gen.: 80's GL/DL/XT/Loyales...
I am having the same issue. I did some research to try and find one that would interchange but decided im going to get it rebuilt. I heard this place was good at it but haven't tried them out yet. I read they can rebuild the vacuum advance or the whole distributor. http://www.philbingroup.com/rebuilt/distributors.htm Besides that there is a thread on here about rebuilding the vacuum advance your self somewhere. If i can find it ill link it. -
Rough idle and part throttle issues, EA81
Kyle691 replied to TomRhere's topic in Old Gen.: 80's GL/DL/XT/Loyales...
Was having the same problem on my buddies brat. this helped. thanks guys! -
Butte Montana Visit!
Kyle691 replied to Twitch de la Brat's topic in Meet n' Greet. Your USMB Welcome Center
iv been stuck there in a snow storm before! to bad no one is around! :/ -
$150 EA Series Front and Rear Bumper (EDIT)
Kyle691 replied to [HTi]Johnson's topic in Products for your Subaru
are these still available?