Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

93 subaru overheating, but not mixing oil/water

Featured Replies

Hey all. Got a 1993 Legacy that is overheating. Obviously head gasket is suspect, but there is no oil in the water or water in the oil. The thermostat has been replaced. It drives for around 10 miles and overheats, but there is still plenty of water in there? Any thoughts?

rusted impeller on water pump or crappy thermostat.

 

head gaskets are RARELY suspect on ej22's, that was only on ej25's. replace thermostat with a DEALER ONLY thermostat and try again. if not, look at water pump. you could get a block test done to test for combustion gases in the coolant

Hey all. Got a 1993 Legacy that is overheating. Obviously head gasket is suspect, but there is no oil in the water or water in the oil. The thermostat has been replaced. It drives for around 10 miles and overheats, but there is still plenty of water in there? Any thoughts?

 

Every ej22 motor I have come across with a blown head gasket (two so far) has exhibited your exact symptoms.

Did you remove the square head plug on the passenger side top of the radiator and backfill the radiator that way when the thermostat was replaced? If not , you need to.

air in the coolant system?

 

before you go any further do the proper burp / belch of the coolant air.

  • Author

How do I go about belching the coolant? Also, if it is the head gasket, how much should I expect to spend on getting it fixed?

How do I go about belching the coolant? Also, if it is the head gasket, how much should I expect to spend on getting it fixed?

 

If you are able to do it yourself, about $200 to $250 for the all the gaskets (head, intake manifold, exhaust manifold, valve cover), seals (crank and cam), timing kit (belt, water pump, and pulleys/tensioners) and maybe even radiator hoses. It is not very technically challenging work, but it can be labor intensive. If you take it somewhere to be done, it can be rather expensive (pushing $1000 in my area).

Did you remove the square head plug on the passenger side top of the radiator and backfill the radiator that way when the thermostat was replaced? If not , you need to.

 

 

:)

with heat temp select to hottest....that way you fill the heater core too, helping remove air.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.