November 23, 201114 yr Starting point. The car had been abandon for three years in a yard by a creek, the owner told me he hated that it was domed to rot. I bout the car the next week. It didn't even run on either. It had spark, I replaced the bad plugs with new bosch plugs, then a new ECU solved the fuel problem. It runs great now it's time for some restoration, before modification.
November 24, 201114 yr Author sites.google.com/site/1980restore/ Here is my project page I'm working on. It has all the pictures of the XT project. Edited November 24, 201114 yr by Rossi86
November 24, 201114 yr Not sure where the pictures are 'hosted' (facebook, picasa/igoogle, photobucket, etc), but generally speaking there are two ways: 1. Most sites will have a 'share' option either to the side, or at the bottom. It may also say "let others see this picture..." etc. Copy the URL it gives you there and paste it into the mini-window that opens when you click the picture share button at the top of the box you type into to make a post here. 2. If that doesn't work, what I do is this: open the picture online in whatever service you are using to host it. Then right click and choose "copy image location" or its equivalent (the exact wording will vary depending on your browser). You will not see a copy screen, but a different URL from the #1 option I describe above WILL copy to your clipboard (you won't see it, though). Then come over here and click the picture share button and click/hit 'paste'. The URL should then appear in the image share box and it should appear in your post after you save the post.
November 24, 201114 yr There should be a thing on here that tells you what to do with pictures, However if you cant find it, Try using a site to host your pictures, For example Photobucket, you download them, take the image url and post it after you click on the little picture diagram above the message youre writing (looks like a sun and mountains) and post. hope this helped.
November 24, 201114 yr Author http://sites.google.com/site/1980srestore That's my google page I have most of the pictures there. I'm still working on the site
December 1, 201114 yr Author Thanks, I'm still working on my page. My XT will be on the road soon. It needs a muffler, front pads to pass inspection. I'm looking to retro fit a exhaust system, I can get a 3 inch pipes that way. Front pads are ordered.
December 7, 201114 yr Author https://sites.google.com/site/1980srestore/Welcome/updates-news/insidework/IMAG_0061.jpg I'm cleaning and repairing the entire inside of the car above is a link to the pictures of progress.
December 7, 201114 yr Author https://sites.google.com/site/1980srestore/Welcome/updates-news/installing/IMAG_0063.jpg https://sites.google.com/site/1980srestore/Welcome/updates-news/installing/IMAG_0068.jpg A look at the results, and volume. Nothing is more rewording to me!
December 7, 201114 yr Hey! A great project! Good luck at work! Would you be interested in selling the interior parts you parting out ?
December 10, 201114 yr Author I don't know yet it depends on what the new seats cost, and the dash cost to be recovered. i like the inside of the car, but the dash pad is all but gone in it. I have to get it on the road before I can really work on it I need a 4wd. It should be on the road next week, just needs a muffler, and wiper blade.
December 10, 201114 yr Because of the turbo and the manifold design it shouldn't be awful to drive without a muffler. Nice project i'll be watching for your interior build. I have one that needs some help my self.
December 11, 201114 yr Author I used refills for the wiper blade, Looking at a Specter or a Thrush Turbo2 muffler to replace the old one until I get the new piping done.
December 18, 201114 yr Author It's nice to know that it can be done with epoxy and patients. https://sites.google.com/site/1980srestore/Welcome/updates-news/electricalfun/IMAG_0076.jpg https://sites.google.com/site/1980srestore/Welcome/updates-news/electricalfun/IMAG_0077.jpg
December 18, 201114 yr Author http://subaruxt.com/forum/viewtopic.php?f=1&t=10030Wiper info. Thank you I know now how i can get wipers.
December 23, 201114 yr Author Greg Rossi off of my Facebook page I hate plastic. My headlight switch broke in my Subaru while they inspected it. December 14 at 5:06pm Greg Rossi Fixed it, I don't know how it broke but it works now. December 14 at 10:42pm · Like Greg Rossi I'm fixing it again I got it back with new inspection, but a broken switch. December 17 at 10:20pm · Like Greg Rossi They broke it good this time. I have to order a new one at $200 and I can't get it till February. Having to explain how to use a switch to a mechanic is sad...
December 23, 201114 yr Author https://sites.google.com/site/1980srestore/Welcome/updates-news/electricalfun/IMAG_0076.jpg https://sites.google.com/site/1980srestore/Welcome/updates-news/electricalfun/IMAG_0077.jpg That was the first time now the houlsing is broken into two peaces, their glue suck all over the dimmer switch's slot.
January 6, 201214 yr Author Drivers side front brake is stuck solid, with a new calper and hardware. The parking brake adjustment was causing this with the old one, now I'm checking the wheel bearings. After it cools.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now