new aftermarket 14 inch rims, that may be OK? Don't want to mod any thing (hopefully), although may have to elongate lug holes cause their spaced 137mm apart - is the offset "sticking out" too far? Just trying to get a little taller than stock cause of 3AT doing 55mph at 3250 rpm (aiming for 55mph at 3000) -- Thank You Everybody!! --

 

http://www.parts-unlimited.com/products/?productId=420459&partNumber=02300327

 

SS ALLOY WHEELS Part Number 0230-0327

Description:  WHL SS212B 14X6 4/137 4+2

Brand:  ITP

Weight: 13.85 lbs.

Retail Price: $94.95

Edited March 30, 20179 yr by Craigar

Have you contacted them to see if they would be willing to drill sets at 4/140? 4/137 is an ATV pattern. I doubt the rims would support a road vehicle and are probably not DOT compliant. Probably need more info from them.

Those are def ATV or Golf Cart wheels

I run 4000rpm at 65 all the time. Not a problem, these engines are made for rpms.

The 3at doesn't respond well to different tire sizes. I changed twice and gas mileage fell through the floor. Also it felt like someone put 500 lbs in the bed.