May 13, 20187 yr I'm looking at Subaru's website to get some exhaust gaskets for my 93 loyale. My question is what gasket goes where? on the website - https://parts.subaru.com/a/Subaru_1993_Loyale-WAGON-TURBO/_54102_6024433/EXHAUST-REAR/A11-440-C1.html it has the same part number for three different exhaust gaskets. I'm guessing the crush gasket goes in between the resonator and y pipe, but I have no clue about the other two. The two I'm talking about almost look interchangeable (one has a divot on the sides). Who knows which goes where?
May 13, 20187 yr Author The gaskets are listed on this link https://parts.subaru.com/a/Subaru_1993_Loyale-WAGON-TURBO/_54102_6024434/EXHAUST-REAR/A11-440-C2.html The diagram is on the first link.
May 13, 20187 yr What do you mean? There's only a donut between the y pipe and mid-pipe, and a single two bolt gasket for the mid pipe to muffler. GD Edited May 13, 20187 yr by GeneralDisorder
May 15, 20187 yr I'm looking at Subaru's website to get some exhaust gaskets for my 93 loyale. My question is what gasket goes where? on the website - https://parts.subaru.com/a/Subaru_1993_Loyale-WAGON-TURBO/_54102_6024433/EXHAUST-REAR/A11-440-C1.html it has the same part number for three different exhaust gaskets. I'm guessing the crush gasket goes in between the resonator and y pipe, but I have no clue about the other two. The two I'm talking about almost look interchangeable (one has a divot on the sides). Who knows which goes where? I went through the same thing: as far as I understand the smaller ones go to the Y pipe. For the exhaust pipe to the exhaust manifold I used Fel Pro 93227. Good luck, Sam
May 15, 20187 yr Author I called the dealer and we got the right ones ordered i believe, I'm stilled waiting for them.
May 16, 20187 yr Head to exhaust I use high temp silicone. Works a treat until you knock your exhaust on a rock when offroading. Cheers Bennie
May 20, 20187 yr Author These are the gaskets I got for my manifold. I believe they are the right ones, they fit and the exhaust no longer leaks. Plus the new stud and helicoil is tight so everything finally worked out. Edited May 20, 20187 yr by MWLoyale
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now