I had posted this video on youtube

 

https://www.youtube.com/watch?v=VuiR4Tqbi3M

 

It seems like the front wheel bearing I'm going to check which side but it seems I have shimmy in both directions when turning the wheel but it's more pronounced when turning to the left.

 

I assume it should not be too hard to take the hub out of the front of the '05 Legacy GT

8 minutes ago, 1-3-2-4 said:

I assume it should not be too hard to take the hub out of the front of the '05 Legacy GT

If you live on salted roads it can be a bear.  Some use this tool to help separate the bearing assembly out of the knuckle

 

These can be tricky, I had one that got quiet when on the outside of the turn, opposite the normal noise pattern.

what he said - they could be smooth sailing.....or not. 

i changed mine wheel bearing last week front driver side. just removed all spindle hub , took it to near garage where people have hydraulic press. and they removed old bearing and put new in place in couple minutes. payed just couple euros . 

same time check those ball joints. if they not knocking but have kinda loose feeling just change them too . 

Edited June 26, 20187 yr by scalman

Replaced one last year in an 08 and from start to finish, about 10 days.