I have a lift that I got from someone here. No instructions. Any one have instructions? I have done it before and think I can do it from memory/feel

 

Basically, swap each short bolt with each long bolt, once the sub frame has lowered you can start putting in the spacers. i started with the rear and worked forward, but i guess working from the front to rear would work too.

I still have mine that I think I can copy for ya. I'll get it tomorrey for ya.

I assume you're talking about an ea82?

Is it a BYB kit?

{laughing cause people still call them PK Lifts}

 

Here comes the shameless plug for BYB:

 

 

New international oval decals ordered. Qman and Zap PM'd ya.

Oh Oh, i want a sticker!!!!

Does this mean new t-shirts too

 

Jibs, if he has a EA82 lift your instructions wont do him much good.

 

-Brian

i never got a sticker in the first place........

Thar be stickers for all the BYB rigs.

 

Tin S, who's kit do you have?

How many stickers are alloted for each car? I mean, can I put one on each quarter panel as well as the back?

here is the directions from my kit. it is many moons old. but i think its still the same.

 

if this is copyright infrengment. let me know and ill take it down.

 

*edit as per requested *

-=Suberdave=-

Suberdave,

I would request that you take this down please and email the pdf, as I was going to do.

Thank you. v/r PK.

HEY!! I never got stickers either.

 

I don't know whose lift it is. It's made from aluminum blocks, but looks identical to the BYB (better? ) lift that I had on my DL. I bought it used on here, and that fella took it off a car he bought with it on. So he didn't know either.

 

{Thanks Zap}

 

Tin S - It's one of ours. We did a couple batches of aluminum kits but they were pricey, so we went back to steel. Now that steel prices have gone ballistic, we are doing more in aluminum too. No advantage to either really. Not much weight savings and both are over-built and guaranteed. Hope you downloaded the instructions, if not I will email. I will get stickers out to all - no worries. thanks, r/ PK.

Suberdave,

I would request that you take this down please and email the pdf, as I was going to do.

Thank you. v/r PK.

 

Sweet! So can I get that pdf emailed to thetinsoldier@4x4roo.com and since I never got stickers with my first lift about 3 years ago. Can I buy some stickers to go with this lift?

 

hi all.

TinSoldier is trying to get the lift on and said he did not get the email.

So can you resend it to subywidow@uswmb.org ?

thanks.

Well I Started to install the lift tonite. I got the strut tower things installed (had to steal the nuts off a parts car). I got the radius rods and found the bolts that looked right, but they look to long by about an inch. So I tried to thread one up in, but it didn't fit. I only found one bolt in my box of lift parts that fit right.

 

I still did not get those instructions. Can someone email them to me? Also, does the instructions tell which bolts to use? I might have to go buy some different ones. Or can I buy a bolt kit? :-P

 

Just sent them now. Sorry for delay.

r/ PK

Just sent them now. Sorry for delay.

r/ PK

 

How big was it? I didn't get it. I upped my limit to 100mb's so that should fix it.