There might be a source where you can get one of these. I will post info once I get all of the info needed.

 

All I can tell you is that I was told that they came off of a japan truck with a ea81.

Let the fun begin:burnout:

here it is. I can e-mail you a larger pic if you post your email address

NICE!!!!!! even if you can get ahold of one i know somone out there will be able to copy the design!!!

I know I can get one but I want to make sure that others can get one too.

I beleive SJR could copy the design, if i remember right he casts him lift parts?

I think if all goes ok it will be cheaper to just buy this one with the carbs on it.

All I can tell you is that I was told that they came off of a japan truck with a ea81.

 

What truck? A Brat?

if you can, try and get the ea81 motor too, they are different, and VERY rare. the exhaust ports and intake ports are larger for better flow. it still will easilly work on a standard ea81, but the other engine would have even better power.

If you have a source for them, I'll take one. Carbs plus manifold that is...

 

GD

That looks just like my intake.(Lucky me)Truly is a rare thing of beauty.

i was just gonna post that jerry

-------------------------------------------------------------------

"NO OFFICER I DIDN'T KNOW THAT WAS A FELONY"

JEFF-2005

if you can, try and get the ea81 motor too, they are different, and VERY rare. the exhaust ports and intake ports are larger for better flow. it still will easilly work on a standard ea81, but the other engine would have even better power.

 

I have one of those. (I'm from australia though)

Didn't know when I bought the car, but the dude selling the car to me said that the mech who put the engine in was willing to pay him $1500 to get it back a year later when the car was on the market. But luckly the dude wanted to sell the whole car, so I got it I was thinking about selling the manifold because the 14L pre 100KM feul issue, But I don't think I will ever think about selling it again. I heard the original dual carb engines have 108HP. I didn't believe it, but then I went for a spin in 4WD-LO around the streets, maybe it does.

 

Also another note. The valves are the other way round on these engine, more like a EA82. So the cam is different too. Makes it very interesting to figure out the rockers after taking the heads off when you don't know this fact. It looks like the engine should run backwards! Also you would need new exhaust setup. The bolt spacing is wider. I should write up all the info I know about these engines on my site I guess...

The gentelman that would be able to supply these has already ran them on one of his ea81. The only reason I am wating on posting all of the info is.

1. I want to make sure I can get mine (wating on a e-mail)

2. I want to make sure that all the info I post is complete so you will not have a hard time getting one. (still wating on a e-mail)

3. I want to give it time on the board for those who dont frequent it much

 

As far as it being off a truck.. I dont think they ment brat when they said that.

If more can be bought count me in.I would love another one.

Ok.. Sorry it took so long but hopefully it might be worth it to a few.

Ok Mykal at Stratus2000 and he did have 8 of these and I think he said 7 of them had carbs. I recived on wensday the only one that had a air filter box:banana: . I dont know how many he has left but here is the info last time I talked to him.

"JOHN, THE CAM WOULD WORK GREAT WITH THE CARBS YOU MAY HAVE TO CLEAN THEM UP THEY HAVE BEEN SITTING FOR A WHILE. THE DUAL CARBS ON THE MANIFOLD $100. AND THE INTAKE ONLY $50."

IT came to like 122 for the total for shipping for the dual carbs and intake.

his contact info is here.

http://www.stratus2000.homestead.com/

THANKS for the heads up man!! i just ordered a set:D

Nice to hear you got one

I hope all who want one gets one before they are gone. Now lets see a write up on the install of one. I am too new at this to be the genuie pig. :-\

I just ordered another set of a intake with carbs and then a bare one without carbs!So now I will have 3 total duals!I know I am a hog about these things.I just can't help myself!

I thought about buying all of them up and then resaleing them at 200-350 a set I could make 2000 grand ez..but ..but... I thought about the fact that I really appricate the help I get on this board and that if most of the old scoob fans on this board are as half as cool as Mcbrat was about saleing me my car.. that I would just hate my self for it later.

I wanted to thank you for including the rest of us with this stuff.I really apreciate the generosity. Also glad to see that brat you bought from Mick found a good home.Is it going to get dualled?

That is my hopes. I have come to the conclusion that the brat is a education in process. I hope to deck heads and swap pistons and put a reground cam in it.

We will see where this road leads me.

:banana: got the duallies today, they look GREAT:D