weber carb return line

[gemery10]

hey guys, Im in the process of putting in 32/36 dgv carb into ea 82. I only have one fuel line in that elbow. Is that normal? What happens to the return line already there for the hi carappy

[mcbrat]

I usually pull the fuel fitting with the little return pipe off the hicrappy, and use it on the weber.

[Bobby_boucher]

i just capped the return and everything seems to be fine.

[Subarian]

I would plumb the return line. I originally had mine capped off, but pressure would build in the tank on hot days, and sometimes I would get leaks and other times I'd just have to live with a strong gas smell. There's a plug on the other side of the fuel inlet on the Weber. You can install a barbed fitting there for the return line. I used two elbows so that the barb is pointing to the back of the carb; that way the return line lies right next to the fuel line.

[spanky_pete]

I usually pull the fuel fitting with the little return pipe off the hicrappy, and use it on the weber.

This is what I'm planning on doing with mine.

[gemery10]

you guys rock. thanks heaps. Bottom line I can run with one line till summer or I get a round to it

[Loyale 2.7 Turbo]

I have done that:

 

http://www.ultimatesubaru.org/forum/showthread.php?t=53143

 

My Loyale have two return lines, so I did plug them between theirselves, and that way it works very fine.