May 14, 200817 yr Author Hey mom look what followed me home got the main rails cut, this is going to go quick
May 14, 200817 yr wow that was quick... intently watching :popcorn: :popcorn: you planning on running it at sandlake in july?
May 14, 200817 yr Author wow that was quick... intently watching :popcorn: :popcorn: you planning on running it at sandlake in july? it may go to Sandlake, we havent set a date yet for Sandlake we may end up going in August or end of July
May 14, 200817 yr Author You gonna run a carbbed EJ22 in this one too? It will have a EJ22 I have all the wiring for the fuel inject so I will probably do that, I do not have a extra Weber ,
May 14, 200817 yr made some modifications to this picture, also would like a built in storage rack on the top weather proof with removable doors I considered building this one, Rhinobuggys "Hummbug", but I didn't want to fabricate all the panels for the body. It has the same frame as the "Bandit" that I built/stretched. The only difference is the body. The frame portion is square steel, only the body is round tube. I think you could easily build the tube portion in a couple weeks just working evenings & weekends. My buddys made me use rock crawler quality steel, so it could have been lighter? But it ain't gonna break! Rage on Scott!
May 18, 200817 yr Author todays progress decided to go with a 71 AN600 Honda hood and grill, got the gas tank and the main frame made up
May 18, 200817 yr Author the frame will be 48" to the outside, the wheels willstick out stock width, will be running 27" swampers with Pug alloys frame ended up being 50" and Im going to put on my 30 x 950 Hankook M/T
May 18, 200817 yr todays progress decided to go with a 71 AN600 Honda hood and grill you gotta ditch that honda emblem and put in a 3rd eye... --Spiffy
May 21, 200817 yr Excuse me, are those seats taken?? :popcorn: Quiet up front! I'm tryin to watch this build. :popcorn:
May 21, 200817 yr Quiet up front! I'm tryin to watch this build. :popcorn: oh, let me stand up, does that help your view back there? :popcorn: any updates?
May 21, 200817 yr Author since the last picture I havent done any fab work, Ive got the seats up there and are figuring the placement of all the main cage bars, design work, thats the fun part, almost ready to cut some more steel , it will have 4 doors and all 4 will have identical frames , also looks like sammy glass for the windshield should work,
May 22, 200817 yr since the last picture I havent done any fab work, Ive got the seats up there and are figuring the placement of all the main cage bars, design work, thats the fun part, almost ready to cut some more steel , it will have 4 doors and all 4 will have identical frames , also looks like sammy glass for the windshield should work, where is the said pics of progress... i know it's an unrully crowd... :popcorn: if you don't have a sami windshield to measure... i have one on my sami i can measure for you.
May 22, 200817 yr Author where is the said pics of progress... i know it's an unrully crowd... :popcorn: if you don't have a sami windshield to measure... i have one on my sami i can measure for you. very hard crowd to please , I am looking for a sammy glass and rubber seal
May 22, 200817 yr http://www.sky-manufacturing.com/suzuki.htm poly carbonate windshield and seal from sky mfg... $175 though...
May 23, 200817 yr are you really keeping the roof that high?? you shouldn't need more than 4 inches above your head. but looking good! working right along! :popcorn:
May 23, 200817 yr Uhhhhmmm! If we could keep the conversation to a minimum, we could all hear what's going on!!! Excuse me that's my cell phone...... Hello.... ...Yes, for the windshield, I used Lexan and put a molding around the edge and a foam weather seal tape against the metal. I clean it carefully and so far have not replaced it. I'll call you back later.... I want to get back to the build.:popcorn:
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now