looking for 13 inch steel rims

going on a 85 gl hatchback

i think they are 4x100 lug pattern but maybe someone can correct me

rims i have now are rusty rusty

new rubber and still leaking

depending on whe you live im in washington but i have silver rims with snow tires on with no rust you can buy for 100 btw they are 4 x 140 unless u have wheel adapters

I have a black set

any particular style?

 

here's what fits: http://www.ultimatesubaru.org/80s/wheels2/wheels.html

 

if you're picky be prepared to pay a bunch for shipping from the northwest where these things are plentiful and rust is scarce...

 

you could also refinish your current wheels ... blast the rust off and powder coat them...

 

also, you might have better luck posting on the Wanted forum...

 

 

--Spiffy

An earlier poster had it correct, you have a 4x140mm bolt pattern. The wheels link will tell you what's available. Shipping can be steep; I just shipped a set of four alloy wheels in two boxes pretty much cross country for just under $60 via ground DHL. Mine were alloy wheels and the two boxes weighed just under 35 pounds each. That should give you a ball park idea of what it would cost to get your wheels from the west coast where the rust isn't quite so bad.

 

Having your current wheels sandblasted and powder coated might be an option considering the cost of shipping. Also, check craigslist for wheels; every once in a while you get lucky. Thirteen inch wheels go pretty cheap on this coast....$40/set of four and up.

I also have a se for sale: 4 with Yokohama Ice Grippers (snow tires) 185/70/13. 2 very good 2 not so good. rims are nice. I'll send you pics if you want them. $75 + shipping unless you live near Boulder, CO.

I have a set of wagon wheels and a set of cromes with some rust, both with tires and will sell for cheep

thanks for the info guys

yes the PNW is subaru heaven

that where i picked up my outback

i found a friend of a friend to help me sandblast the rims

lucky for me i have two sets

can i powder coat them my self or is this something $$$$$$$$$

sorry not looking to buy anything

Powder coating costs money. Por 15 costs less money.